Vincent Audio SV-234 manuel dutilisation Connection of a Recording Device

Page 35

Many devices which can be controlled by a switching signal (not preamplifiers or integrated amplifiers), have two terminals which do not differentiate between input and output. In this case either of the two can be selected.

"POWER CONTROL" sockets of preamplifiers or integrated amplifiers must not be interconnec- ted! All receiving devices must not be connected to more than one preamplifier or integrated amplifier (directly or indirectly)!

CONNECTION OF A RECORDING DEVICE

If you want, you can use the RCA sockets "REC OUTPUT" (13) on the back of the appliance to connect an analogue stereo recording device (e.g. CD recorder, cassette recorder etc.) or another appliance that is intended for receiving the unchanged, fixed stereo output level (line level) from the signal source selec- ted on the amplifier at any given time. The output level is independent from the volume setting but reacts to the "MUTE" command.

SV-234

RCA connection

e.g. Tape recorder

LINE IN

Connect this signal output to the signal input ("LINE IN", "TAPE IN" oder "REC IN") on the recording appli- ance using RCA cables. Please note that some recording equipment can have a slightly detrimental effect on the audio signal quality. Some recording devices have rather low input impedance, which can slight- ly alter the input signal voltage. For maximal music enjoyment we recommend that you connect to the “REC” terminal only for as long as the recording is actually being made.

CONNECTION OF TWO ADDITIONAL MAIN AMPLIFIER CHANNELS

You only need the "PRE OUTPUT" sockets (14) if you want to use a separate stereo amplifier or two mono amplifiers to supply two additional loudspeakers. This makes sense if you intend to use two more loud- speakers for stereo music playback, for example in a separate zone (another room of your home). These loudspeakers are then connected to the speaker outputs of the additional amplifier(s). The amplifier out- put connections "PRE OUTPUT" (14) must be connected with the input connectors of the main amplifier, in most cases labelled "INPUT", "POWER AMP IN" or "MAIN INPUT".

SV-234

RCA connection

MAIN

e.g. Stereo main amplifier

INPUT

Vincent 35

Image 35
Contents Vincent Cher client Sehr geehrter KundeDear Customer INHALTSVERZEICHNIS/CONTENTS/SOMMAIRE Aus/Anschalten Wartung/VeränderungenAlle Betriebsmittel, die an die Netzspannung Netzkabel/AnschlussErklärungen/Hinweise Erläuterung der grafischen SymboleWeitere Hinweise CE-ZeichenBeschreibung DES Gerätes LieferumfangLEVEL/ Lautstärketasten Power NetzschalterVorderansicht AnzeigeRückansicht Power ControlBatterien FernbedienungHören möchten Gain Taste für -8dB Abschwächung aller AusgangssignaleTasten DER Fernbedienung EingangswahltastenZUR Besonderen Beachtung InstallationAnschluss Eines Quellgerätes MIT STEREO-XLR-AUSGANG Anschluss DER Quellgeräte MIT CINCH-HOCHPEGELAUSGANGKabelverbindungen FÜR DIE Einschaltsteuerung Power Control SV-234 Endverstärker Anschluss Zweier Zusätzlicher Endstufenkanäle Anschluss Eines AufnahmegerätesAnschluss DER Lautsprecher Anschluss DES Netzkabels Bedienung DES Gerätes Helligkeit der Und die Lautstärkeschritte sind zu grobGain Und REC Output 13 werden kleinerNetzbrummen Weitere TippsEinspielzeit/Aufwärmen Fehlersuche Symptom Mögliche Fehlerursache AbhilfeTechnische Daten Audio-Quellen/Audio-Quellgeräte LEXIKON/WISSENSWERTESSafety Guidelines Other Instructions Description of the Appliance Included in DeliveryFront View PRE Output Preamplifier Output Rear ViewSpeaker Loudspeaker terminals If desired, you can connect a recording deviceOld New Remote ControlUsing batteries BatteriesInput Selector Buttons Buttons of the Remote ControlLevel and Level Volume keys MuteRCA connections Do not connect PRE OUT and MainSpeaker cable connections Protective capsConnection of ONE Audio Source with XLR Output Connections for the Standby Control Power Control SV-234 is intended to react to the trigger signal Connection of TWO Additional Main Amplifier Channels Connection of a Recording DeviceConnection of the Loudspeakers Connection of the Power Cable Operating the Appliance Gain -08dB ← ... → Gain -00dB Signal output of the preamplifier PRE OutputCorresponding remote controller buttons as well as using PRE Output 14 is smallerNet frequency noise TipsBurn in/ Warm up Symptom Possible Cause Countermeasure Search for ErrorsTechnical Specifications Audio Sources/Source devices GlossaryHumidité/Chaleur/Vibrations Consignes DE SecuriteEntretien/Modifications Câble dalimentation/BranchementExplications/Remarques Explication des symboles graphiquesAutres Consignes Sigle CEDescription DE Lappareil Objet DE LA LivraisonAffichage LEVEL/ touches de volumeFacade Avant Input Balanced entrée XLR Facade ArriereSpeaker bornes de raccordement Piles TelecommandeQuand l’entrée Line 5 Main Input est sélec- 19 tionnée Touches DE LA TélécommandeLevel et Level touches de volume Fiches de raccordements Pas de nécessité de liaison préampli, ampli de puissanceDépose du capot de protection Prises RCARaccordement D’UN Appareil Source Avec LA Sortie STEREO-XLR Amplificateur stéréo SV-234 Par ex. amplificateur Raccordement D’UN Appareil D’ENREGISTREMENT Branchement DES HAUT-PARLEURS Branchement DU Câble Dalimentation Commandes DE L‘APPAREIL De niveau Le volume a été augmentéProgressivité du réglage est trop grossière 8dB amortissement’expérience montre que ce phénomène est soit dû ConseilsTemps de rodage / échauffement Ronflement du secteurSymptôme Cause possible du défaut Remède Resolution DE ProblemesCaracteristiques Techniques Sources audio/lecteurs sources Lexique / BON a SavoirVincent

SV-234 specifications

The Vincent Audio SV-234 is a high-end integrated amplifier that embodies a blend of modern technology and classic audio performance, appealing to both audiophiles and casual listeners alike. This sophisticated device is designed to provide pure, dynamic sound reproduction while integrating seamlessly with various audio sources and systems.

One of the key features of the SV-234 is its dual-mono design, which enhances soundstage and imaging. The separate amplifier sections for left and right channels ensure minimal crosstalk, leading to a more immersive listening experience. This design principle is essential for delivering a clean and accurate audio signal, effectively minimizing distortion and maximizing fidelity.

The amplifier boasts an impressive power output, rated at 2 x 150 watts into 8 ohms and 2 x 240 watts into 4 ohms. This significant power output allows the SV-234 to drive a wide range of speakers effortlessly, making it suitable for various configurations, from compact bookshelf speakers to larger floor-standing models. In addition to power, the unit's class AB amplification technology provides a warm and engaging sound that appeals to discerning listeners.

In terms of connectivity, the Vincent Audio SV-234 is equipped with an array of inputs, including multiple line-level analog inputs, a phono input for turntables, and digital inputs, including USB, coaxial, and optical. This extensive selection makes it easy for users to integrate the amplifier into their existing audio setup, allowing for playback from various sources, such as CD players, streaming devices, and computers.

The SV-234 is also designed with user-friendly features, such as a remote control and a clear, intuitive front panel layout. The built-in digital-to-analog converter (DAC) enhances sound quality when using digital sources, ensuring that users receive the best possible listening experience regardless of the input method.

In terms of build quality, the SV-234 features a sturdy, elegant chassis that is both aesthetically pleasing and robust enough to withstand everyday use. The combination of high-quality components and innovative technologies makes this amplifier a testament to Vincent Audio's commitment to creating exceptional audio products.

Ultimately, the Vincent Audio SV-234 is a remarkable integrated amplifier that combines power, versatility, and exceptional sound quality. Its advanced features and thoughtful design make it an ideal choice for anyone seeking to elevate their audio experience.