Falcon SG6K-2TC, SG5K-1TXC, SG5K-2TXC, SG5K-2TC, SG6K-1TX specifications USE Copper Conductors only

SG5 & 6kVA Extended Battery Bank Rear Panel Details

(Hardwire Model Shown)

For all Input/Output

wiring

USE COPPER

CONDUCTORS ONLY

USE ONLY THE WIRE

GAUGE & TYPE

REFERENCED IN THE

PRECEEDING WIRING

TABLE

Reference the Leveling Feet adjustment procedure

COOLING FAN

DO NOT BLOCK

Battery Disconnect &

Circuit Breaker

AC Input Voltage ---	208-240 Vac
AC Input Current ---	4.5A max
Charger Current ---	3.9A
DC Output Voltage ---	240 Vdc
DC Output Current ---	30A

Input/Battery

Terminal Block

CAUTION

Reference the torque specifications in this manual prior to making terminal block connections.

UTILITY INPUT OUTPUT TO NEXT BANK BATTERY

					+
G	L	L	L	L
N	1	2	1	2
						240 Vdc
D

Note: Input and output wiring must meet the National Electrical Code, ANSI/NFPA70. Please refer to the wire Gauge table on page 6 for minimum wire gauge. THIS UNIT MUST BE INSTALLED BY A QUALIFIED ELECTRICIAN.

CAUTION

To reduce the risk of fire, connect only to a circuit provided with a "branch rated" over-current protection device in accordance with the National Electrical Code, ANSI/NFPA 70.

12