Installation Instructions for All Models Except Hardwire
1.0UPS Input & Output Requirements.
Note: All SG Series UPS models, except Hardwire models, may be installed by anyone providing the specified outlet, circuit and circuit protections are available. Other plug and receptacle configurations are available, please reference page 14 or contact the factory should an unlisted configuration e required..
MODEL | REQUIRED | REQUIRED INPUT |
| RECEPTACLE | CIRCUIT BREAKER |
50A | ||
30A | ||
30A | ||
30A | ||
30A |
CAUTION
To reduce the risk of fire, connect only to a circuit providing
2.0.UPS Output Details
Note: The outputs of the referenced SG 5 & 6kVA models are not configured for 208 or 240Vac
MODEL |
| STANDARD OUTLET | FUSES |
|
| CONFIGURATION | Class CC |
|
|
|
|
Output 1: 208, 220, 230 or 240Vac selectable, 3500W* | (1) | (2) KLKD 30 | |
Output 2: 115, 120, 125 or 130Vac, (follows output 1), 3500W* | (2) Duplex | (2) KLKD 20 | |
|
|
| |
Output 1: 208, 220, 230 or 240Vac selectable, 3500W |
| (1) | (2) KLKD 30 |
Output 2: None |
|
|
|
|
|
|
|
Output 1: 208, 220, 230 or 240Vac selectable, 3500W* | (1) | (2) KLKD 30 | |
Output 2: 115, 120, 125 or 130Vac, (follows output 1) | 3500W* | (2) Duplex | (2) KLKD 20 |
|
|
| |
Output 1: 208, 220, 230 or 240Vac selectable, 4200W |
| (1) | (2) KLKD 30 |
Output 2: None |
|
|
|
|
|
|
|
Output 1: 208, 220, 230 or 240Vac selectable, 4200W* | (1) | (2) KLKD 30 | |
Output 2: 115, 120, 125 or 130Vac, (follows output 1) | 4200W* | (2) Duplex | (2) KLKD 20 |
* Maximum load at outputs 1 & 2. |
|
|
|
All UPS outputs are protected by fuses. Always replace these fuses with the same type and rating.
13