RAD Data comm RIC-E1 operation manual Quick Setup Menu, Menu Structure of Management Utility

RIC-E1Installation and Operation Manual Appendix D IR-IP Interface Module

Menu Structure of Management Utility

Figure D-7shows the menu structure of the IR-IP management utility.

Main Menu

1. Quick Setup	2. Management
	Access

1.Telenet Password

2.Telenet Activity Timeout

3.SNMP Access

4.SNMP Read Community

5.SNMP Write Community

6.SNMP Trap Community

7.SNMP Management Table

1.LAN IP Address

2.LAN IP Mask

3.WAN IP Address

4.WAN IP Mask

5.Default Gateway

6.DHCP Server Address

7.Read Protocol From DIP Switches

8.Protocol

3. Advanced Setup 4. Device Control

1. Device Identification		1.	New Software Download
1.	Device Name		1.	Server IP Address
2.	Contact Person		2.	File Name
3.	System Location		3. Total Timeout
			4.	Start Operation
2. Interface Parameters
1.	LAN Status	2.	View Error Log
2.	WAN Status
3.	WAN Throttle
4. Aging Timeout		3.	Erase Configuration
3. Protocol Parameters (FR)
1.	Self Learn	4.	Resets
2.	Maintenance Protocol		1.	Reset Device
			2.	Reset LAN
3.	DLCI
			3.	Reset WAN
4.	CIR
5.	EIR

5.View

1.Configuration and Connection

2.ARP Tables

3.Multicast Groups Table

4.Statistics

6.Diagnostic Tool PING Terminal

1.Ping IP Address

2.Start Pinging

3.Stop Pinging

3.Protocol Parameters (PPP)

1.Header and Control Field Compression

2.Protocol Field Compression

3.Authentication Protocol

4.Security Host/Guest

5.User Name To Send

6.Password To Send

7.User Name To Accept

8.Password To Accept

4.Multicast

1.Multicast Forwarding

2.Static Groups

Figure D-7. Management Utility, Menu Structure

D.7 Quick Setup Menu

The Quick Setup menu is used to select the main parameters’ values that must be defined before you start using IR-IP.

Use the Advanced Setup menu (see the Advanced Setup Menu section below) to specify values for other IR-IP configuration parameters not included in this menu.

To access the Quick Setup menu:

•From the Main menu, type 1.

The Quick Setup menu appears (Figure D-8).

IR_IP		<IR-IP>	S/W Ver. 1.21 31/IR (date)
Quick Setup
=====================================================================
1.	LAN IP Address		:192.168.100.001
2.	LAN IP Mask		:255.255.255.000
3.	WAN IP Address (empty for unnumbered)		:
4.	WAN IP Mask (empty for unnumbered)		:
5.	Default Gateway (empty - WAN interface)		:
6.	DHCP Server IP Address (empty for relay disabled) :
7.	Read Protocol From DIP Switches		:[ Yes ]
8.	Protocol		:[ Frame Relay ]

Press one of the numbers to select or ESC:

Figure D-8. Quick Setup Menu

Quick Setup Menu D-13

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com