RAD Data comm RIC-E1 operation manual Multicast IP

RIC-E1Installation and Operation Manual Appendix D IR-IP Interface Module

Security Host/Guest

This option can be used to configure the IP router either as a guest unit, to be authenticated by another router, or as a host unit, that authenticates other routers.

User Name To Send

The name by which an IP router card configured as guest identifies itself.

Password To Send

The password by which an IP router card configured as guest identifies itself.

User Name To Accept

The user name to be accepted by an IP router configured as host, when an incoming connection request is received.

Password To Accept

The user password to be accepted by an IP router configured as host, when an incoming connection request is received.

A typical PPP Protocol Parameters menu is shown in Figure D-16.

IR_IP<IR-IP>S/W Ver. 1.21 31/IR (date)

Quick Setup Management Access Advanced Setup

.....................................................................

Device identification Interface Parameters Protocol Parameters

=====================================================================

1.	Header and Control Field Compression	:[ No	]
2.	Protocol Field Compression:	:[ No	]
3.	Authentication Protocol	:[ NONE/NONE ]
4.	Security Host / Guest	:[ Guest ]
5.	User Name To Send	:
6.	Password To Send	:
7.	User Name To Accept	:
8.	Password To Accept	:

Press one of the numbers to select or ESC:

Figure D-16. PPP Protocol Parameters Menu

Multicast IP

The Multicast IP menu is used to specify the IP multicast frame forwarding parameters, and to access the static multicast groups’ table.

To access the Multicast IP menu:

•From the Advanced Setup menu, press 4.

The Multicast IP menu appears (Figure D-17).

Advanced Setup Menu D-21

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com