RAD Data comm RIC-E1 Interface Parameters Menu, Device Name, Contact Person, System Location

Appendix D		IR-IP Interface Module	RIC-E1Installation and Operation Manual
	IR_IP	<IR-IP>	S/W Ver. 1.21 31/IR (date)
	Quick Setup
	Management Access
	Advanced Setup
.....................................................................
	Device identification
=====================================================================
1.		Device Name	:IR-IP..
2.		Contact Person	:Name of contact Person
3.		System Location	:The location of this device

Press one of the numbers to select or ESC:

Figure D-13. Device Identification Menu

Device Name

Select this parameter to assign an arbitrary name to IR-IP for identification by the system manager (up to eight characters). The assigned name is displayed in the screen header.

Contact Person

Select this parameter to enter the name of the person to be contacted with matters pertaining to this equipment unit.

System Location

Select this parameter to enter the physical location of the device.

Interface Parameters Menu

The Interface Parameters menu is used to control the operation of IR-IP interfaces.

To access the Interface Parameters menu:

•From the Advanced Setup menu, type 2.

The Interface Parameters menu appears (Figure D-14).

IR_IP<IR-IP>S/W Ver. 1.21 31/IR (date)

Quick Setup Management Access Advanced Setup

.................................................................

Device identification

Interface Parameters
=================================================================
1.	LAN Status	:[ Open	]
2.	WAN Status	:[ Open	]
3.	WAN Throttle	:[ Full	]
4.	Aging Timeout (min)	:5.

Press one of the numbers to select or ESC:

Figure D-14. Interface Parameters Menu

D-18 Advanced Setup Menu

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com