RAD Data comm RIC-E1 operation manual Static Groups, To access the Device Control menu

RIC-E1Installation and Operation Manual Appendix D IR-IP Interface Module

Static Groups

Select this parameter to access the static multicast groups table. The table is used to specify the IP addresses for up to 10 IP multicast groups. To access the Static Groups menu:

•From the Multicast IP menu, type 2. The following screen appears:

IR_IP<IR-IP>S/W Ver. 1.21 31/IR (date)

Static Multicast Groups Table

-----------------------------

Group IP Address

1. ................

2. ................

3. ................

4. ................

5. ................

6. ................

7. ................

8. ................

9. ................

10. ...............

Press 'A'-add, 'E'-edit, 'D'-delete, 'C'-clear all, 'ESC'-exit:

Figure D-18. Static Multicast Groups Table

D.10 Device Control

The Device Control menu is used to download software from TFTP servers and perform interface and device resets.

To access the Device Control menu:

•From the Main menu, type 4.

The Device Control menu appears (Figure D-19).

IR_IP<IR-IP>S/W Ver. 1.21 31/IR (date)

Quick Setup Management Access Advanced Setup Device Control

----------------------------------------------------------

1.New Software Download

2.View error LOG

3.Erase Configuration

4.Resets

Press one of the numbers to select or ESC:

Figure D-19. Device Control Menu

Device Control D-23

Order from: Cutter Networks Ph:727-398-5252/Fax:727-397-9610 www.bestdatasource.com