Sony VPL-W400Q Aspect Select Menu, Auto Wide, Aspect Select menu is used to set the picture mode

The ASPECT SELECT Menu

The ASPECT SELECT menu is used to set the picture mode.

		V I D E		O
INPUT	A U T O W I D E : O F F
SELECT	A S P E C T : S U B T I T L E
MEMORY
SELECT	V S C R O L L :	0
ASPECT	T I T L E A R E A : 4
SELECT
SET
SETTING
INPUT
INFO.	SEL:
		EXIT:	MENU

Operation

When changing the adjustment level:

1. Select an item.

Use the V or the v key on the control panel to select the item, then press the b or the ENTER key.

On the Remote Commander, move the joy stick up or down to select the item, then move it to the right or press the ENTER key.

The selected item is dislayed at the bottom.

VS C R O L L : + 2 0

2.Change the adjustment level.

To increase the number, press the V or the b key.

On the Remote Commander, move the joy stick up or to the right.

To decrease the number, press the v or the B key.

On the Remote Commander, move the joy stick down or to the left.

3.Press the ENTER key to restore the original screen.

The original screen is restored.

When changing the setting:

1. Select an item.

Use the V or the v key on the control panel to select the item, then press the b or the ENTER key.

On the Remote Commander, move the joy stick up or down to select the item, then move it to the right or press the ENTER key.

The pop-up menu for the selected item appears.

V I D E O

INPUT	A U T O	W I D E	:	O N
SELECT	A S P E C T : S U		B O F		F L E
MEMORY
SELECT	V S C R O L L : + 2 0
ASPECT	T I T L E		A R E A : 0
SELECT
SET
SETTING
INPUT	SEL:	SET:	ENTER	RESET:		RESET
INFO.					EXIT:	MENU

2. Change the setting.

Press the V or the v key on the control panel.

On the Remote Commander, move the joy stick up or down.

3.Press the ENTER or the B key on the control panel to restore the original screen.

On the Remote Commander, press the ENTER key or move the joy stick to the left.

AUTO WIDE

Selects the AUTO WIDE mode.

V I D E O

INPUT	A U T O	W I D E	:	O N
SELECT	A S P E C T : S U		B O F		F L E
MEMORY
SELECT	V S C R O L L : + 2 0
ASPECT	T I T L E		A R E A : 0
SELECT
SET
SETTING
INPUT	SEL:	SET:	ENTER	RESET:		RESET
INFO.					EXIT:	MENU

ON: The picture automatically switches to wide- screen mode (ZOOM or SUB TITLE) when a letter box signal is received.

When an ID-1 signal is received, the picture is automatically set to FULL or ZOOM.

OFF: The AUTO WIDE function does not work.

Note

The AUTO WIDE function may not work correctly depending on a video signal. In this case, set the AUTO WIDE function to OFF.

24 (EN)