Sony VPL-W400QM manual Location and Function of Controls, Control Panel

Location and Function of Controls

Control Panel

PATTERN PICTURE

MUTING VOLUME

AUDIO

!` !… 9

		MENU	INPUT	POWER	POWER
						1
			SELECT
				u STANDBY
				LAMP
RESET		ENTER		TEMP	LIGHT	2
8	7	6	5 4	3

1 POWER key

Press to turn the projector on and off once the projector is in the standby mode. The POWER indicator lights in green when the power is turned on. When turning off the power, press and hold the POWER key for about one second.

TEMP (Temperature): Lights up or flahes under the following conditions:

•Lights up when temperature inside the projector becomes unusually high.

•Flashes when the fan inside the projector stops.

For details on the LAMP and the TEMP indicators, see page 34.

2 LIGHT key

Lights the back lighting (orange) for the control panel when the power is turned on. Press again to turn off the back lighting.

3 Indicators

POWER: Lights in green when the power is turned on. Flashes in green while the cooling fan runs after turning off the power with the POWER key. The fan runs for about 1 minute and 30 seconds after turning off the power. The POWER indicator flashes quickly for the first minute. During this time, you will not be able to turn the power back on with the POWER key.

STANDBY: Lights in red when the MAIN POWER switch at the rear of the projector is turned on. Once in the standby mode, you can turn the projector on and off with the POWER key on the control panel or the Remote Commander.

Note

When the MAIN POWER switch is turned off, there will be a slight delay before the indicator goes off.

LAMP: Lights up or flashes under the following conditions:

•Lights up when a trouble has prevented the lamp from lighting.

•Flashes when the lamp cover or air filter cover is not secured firmly.

Note

When the LAMP indicator lights up, never open the lamp cover if the projector is installed on the ceiling.

4 INPUT SELECT key

Selects the input signal. Each time the key is pressed, signal from equipment connected to VIDEO IN and INPUT-A connectors is selected alternately.

5 MENU key

Press to display the on-screen menu. Press again to clear the menu.

6 ENTER key

Press to enter the settings of items in the menu system.

7 Arrow keys (V/v/B /b)

Used to move the on-screen cursor or to make various adjustments.

8 RESET key

Press to restore the value of an item back to its factory preset value. This key functions when the menu or a setting item is displayed on the screen.

9 VOLUME +/– keys

Adjust the volume of the built-in speakers and output level of the AUDIO OUT connectors.

+: Increases the volume.

– :Decreases the volume.

!º MUTING keys

Cuts off the picture and sound.

PICTURE: Press to cut off the picture. Press again to restore the picture.

AUDIO: Press to cut off the sound. Press again or press the VOLUME + key to restore the sound.

! ¡ PATTERN key

Display a pattern on the screen for focus adjustment. Press again to clear the pattern.

8 (EN)