Cisco Systems 11.0 BT manual Following command permits generic LU pool use

Page 23

generic-pool

Similarly, if generic-pool permit is speciﬁed, any inactive LUs are immediately available for dynamic connections. Moreover, any active LUs that were dynamic previously (before generic-pool deny was issued) return to being dynamic.

Example

The following command permits generic LU pool use:

generic-pool permit

TN3270 Server Commands 23

Image 23

Contents January 15 Introduction IntroductionRelease Note Cisco IOS Packaging Boot ROM RequirementsCIP Boot Image Requirements Platform SupportMicrocode Software New Software Features in 11.010BT Update to Conﬁguration GuideConﬁguring TN3270 Server on the Channel Interface Processor Formation of LU Model Type and Number Configuring TN3270 on a Channel Interface ProcessorConﬁguring TN3270 on a Channel Interface Processor Dynamic LU AllocationString from client Ascii Requested? String to Host Ebcdic Speciﬁc LU AllocationExamples of Model String Mapping IP-address Type Number SNA Session Switch-End Node DlurMultiple Hosts Support Direct PU Conﬁguration in Router Adapte Comman NameIDBLK=05D TN3270 Conﬁguration Modes TN3270 Configuration ModesTask Command Dlur Conﬁguration Mode TN3270 Server Conﬁguration ModeCommands Allowed in Multiple Modes Dlur SAP Conﬁguration ModePU Conﬁguration Mode Task List for Non-APPN Hosts TN3270 Configuration Task ListTN3270 Conﬁguration Task List Task List for Multiple Appn HostsConﬁgure PU Parameters on the TN3270 Server Conﬁgure TN3270 ServerConﬁgure SAPs under Dlur TN3270 Configuration Task List CommandConﬁgure Dlur Pu pu-name idblk-idnum ip-address Conﬁgure PUs under DlurMonitor the TN3270 Server Conﬁguration dialog to conﬁgure the TN3270 function follows TN3270 Conﬁguration ExampleSYD.TN3020 SYD.VMG Update to Command Reference Update to Command ReferenceDlur DlurDlus-backup Dlus-backupGeneric-pool Generic-poolFollowing command permits generic LU pool use Idle-time Idle-timeKeepalive KeepaliveLink LinkLsap token-adapter Link Host rmac 4000.0000.0001 rsap 4. It must be unique within the internal adapter in that no LsapLsap Internal adapter type on the CIP card, which corresponds toRelated Commands Maximum-lus Maximum-lusPreferred-nnserver Preferred-nnserverPUs may use the same value on the internal adapter as long Pu directPu direct Hosts are in which domains and does not enforce the uniqueWhen a speciﬁc LU name request is needed. The format can Defaults34 TN3270 Server Commands This value must match the idblk-idnum value deﬁned at Pu DlurPu Dlur LU number Show extended channel tn3270-serverShow extended channel tn3270-server Show tn3270-server Field DescriptionsDlus fq-dlusname Fail numberNumber Dlur fq-cpname38 TN3270 Server Commands Show extended channel tn3270-server client-ip-address Show extended channel tn3270-server client-ip-addressIp-addrtcpport State lu-state Show tn3270-server client-ip-address Field DescriptionsLU locaddr LU lu-nameNumber/number Show tn3270-server dlur Field Descriptions Show extended channel tn3270-server dlurShow extended channel tn3270-server dlur VRN fq-name TGN tg-number Show extended channel tn3270-server dlurlinkShow extended channel tn3270-server dlurlink Show tn3270-server dlurlink Field DescriptionsShow extended channel tn3270-server pu Show extended channel tn3270-server puState pu-state Show tn3270-server pu Field DescriptionsLU states and their meanings are Show extended channel tn3270-server pu lu Show extended channel tn3270-server pu luShow tn3270-server pu lu Field Descriptions 50 TN3270 Server Commands Shutdown ShutdownTcp-port Tcp-portTiming-mark Timing-markTn3270-server Tn3270-serverUnbind-action Unbind-actionVrn VrnCisco Connection Online Cisco Connection OnlineCisco Connection Documentation Cisco Connection Documentation