Cisco Systems 11.0 BT manual Show extended channel tn3270-server pu

show extended channel tn3270-server pu

show extended channel tn3270-server pu

Use the show extended channel tn3270-server pu privileged EXEC command to display the PU configuration parameters, statistics and all the LUs currently attached to the PU.

show extended channel slot/2 tn3270-server pu pu-name

Syntax Description
extended channel	(Optional) Specifies a particular CIP in the router where slot is the
slot/2	slot number. The port value for a TN3270 server will always be 2.
pu-name	PU name that uniquely identifies this PU.
Command Mode
Privileged EXEC

Usage Guideline

The display shown depends on whether the PU is a direct PU or a SNA session switch PU.

Sample Displays

The following is sample output on the Cisco 7000 from the show extended channel tn3270-server pu command for a direct PU:

router# show extended channel 3/2 tn3270-server pu EXT2

name(index)			ip:tcp	xid	state	link	destination	r-lsap
EXT2(1)		172.28.1.106:23		05D18092 ACTIVE		tok 0	4000.7470.00e7 08 04
idle-time		0	keepalive	0	unbind-act discon		generic-pool perm
bytes 100 in, out; frames 90 in, 4 out; NegRsp 6 in, 0 out
actlus 4, dactlus 0, binds 0
lu	name	client-ip:tcp		state	model	frames in out idle for
1	EXT2001	171.69.176.34:1897		ACTIVE	327805 1	1	4:32:49
2	EXT2002	never connected		ACTIVE	1	1	4:32:49

The following is sample output on the Cisco 7000 from the show extended channel tn3270-server pu command for a SNA session switch PU:

router# show extended channel 3/2 tn3270-server pu INT1

name(index)			ip:tcp	xid	state	link	destination		r-lsap
INT1(5)		172.28.1.106:23		05D18091 ACTIVE		dlur	MPX.GOAN1
idle-time		0	keepalive	0	unbind-act discon		generic-pool perm
bytes 50 in, out; frames 87 in, 2 out; NegRsp 3						in, 0 out
actlus 2, dactlus 0, binds 0
lu	name	client-ip:tcp		state	model	frames in out		idle for
1	GOAN1X01	never connected		ACTIVE		1	1	0:32:14
2	GOAN1X02	never connected		ACTIVE		1	1	0:32:14

TN3270 Server Commands 45