Cisco Systems 11.0 BT manual Show tn3270-server pu lu Field Descriptions, LU locaddr

show extended channel tn3270-server pu lu

	Client connect req
	Reply PSID pos rsp
	actlu req
	bind req
	sdt req
OUT	len=12	2Dxxxxxxxx456B80000D0201
IN	len=25	xxxxxxxxxx45EB80000D0201000000
OUT	len=53	2Dxxxxxxxx466B800031010303B1
IN	len=10	2D0001010646EB800031
OUT	len=10	2D00010106476B8000A0
IN	len=10	2D0001010647EB8000A0
OUT	len=1677	2Cxxxxxxxx010381C07EC7114040
IN	len=9	2C0001010001838100

Table 10 describes significant fields in the display.

Table 10 Show tn3270-server pu lu Field Descriptions

Field	Description
LU locaddr	LOCADDR of the LU.
NAME lu-name	Name of the TN3270 LU.
CLIENT-IP:TCP	Client’s IP address and TCP port number.
ip-addr:tcpport
STATE lu-state	The LU state and their meanings are:
	•	unknown—LU is in an undefined state.
	• inactive—LU did not receive ACTLU.
	• active—LU received ACTLU and acknowledged positively.
	•	p-sdt—LU is bound, but there is no SDT yet.
	•	act/sess—LU is bound and in session.
	•	p-actlu—Telnet connects and is awaiting ACTLU.
	•	p-ntf/av—Awaiting host notify-available response.
	•	p-ntf/ua—Awaiting host notify-unavailable response.
	• p-reset—Waiting for a buffer to send DACTLU response.
	• p-psid—Waiting for NMVT Reply psid response.
	•	p-bind—Waiting for host to send bind.
	•	p-unbind—Awaiting host unbind response.
	•	wt-unbnd—Waiting for client to acknowledge disconnection.
	•	wt-sdt—Waiting for client to acknowledge SDT.
MODEL model	3278 model type of client; blank if STATIC LU.
FRAMES IN number	Number of frames sent to the host.
FRAMES OUT number	Number of frames sent out from the host.
IDLE FOR time	Time the client has been idle. The time is in HH:MM:SS.
PU IS pu-name	Name of the PU.
LU IS type	Whether LU is DYNAMIC or STATIC.
NEGOTIATED type	Whether client is TN3270 or TN3270E.
BYTES IN/OUT	Total number of bytes sent to/received from the host.
number/number

TN3270 Server Commands 49