Cisco Systems 11.0 BT manual Tn3270-server

tn3270-server

tn3270-server

Use the tn3270-serverinterface configuration command to start the TN3270 server on a CIP or to enter TN3270 configuration mode. Use the no form of this command to disable all TN3270 server activity on a CIP.

tn3270-server no tn3270-server

Syntax Description

This command has no arguments or keywords.

Default

No TN3270 server function is enabled.

Command Mode

Interface configuration

Usage Guidelines

Only one TN3270 server can run on a CIP. It will always be configured on port 2, which is the internal LAN interface port.

The no tn3270-servercommand shuts down TN3270 server immediately. All active sessions will be disconnected and all DLUR and PU definitions deleted from the router configuration. To restart a TN3270 server, you must reconfigure all parameters.

Example

The following command starts the TN3270 server and enters TN3270 configuration mode:

tn3270-server

54TN3270 Server Commands