shutdown
shutdown
Use the shutdown interface configuration command to shutdown a physical interface or the internal LAN interface on the CIP when you are in interface configuration mode. The shutdown command also shuts down TN3270 entities, such as PU, DLUR, and DLUR SAP, depending on which configuration mode you are in when the command is issued. Use the no form of this command to restart the interface or entity. The entity affected depends on the mode in which the command is issued.
shutdown no shutdown
Syntax Description
This command has no arguments or keywords.
Default
The interface or entity is enabled.
Command Modes
CIP interface configuration
TN3270 configuration
PU configuration
DLUR configuration
DLUR SAP configuration
Usage Guidelines
In CIP interface configuration mode, the command applies to the entire CIP.
In TN3270 configuration mode, the command applies to the whole TN3270 Server.
In PU configuration mode, the command applies to the DLUR or direct PU.
In DLUR configuration mode, the command applies to the whole DLUR subsystem.
In DLUR SAP configuration, mode the command applies to the local SAP.
Example
The following command issued in TN3270 configuration mode shuts down the entire TN3270 server:
shutdown
TN3270 Server Commands 51