unbind-action
unbind-action
Use the
TN3270 server receives an UNBIND. Use the no form of this command to restore the default.
Syntax Description |
|
keep | No automatic disconnect will be made by the server upon |
| receipt of an UNBIND. |
disconnect | LUT2 session clients will be disconnected upon receipt of |
| an UNBIND. LUT1 and LUT3 session clients are not |
| automatically disconnected. |
Defaults
In TN3270 configuration mode, the default is disconnect.
In PU configuration mode the default is the value currently configured in TN3270 configuration mode.
Command Modes
TN3270 configuration
PU configuration
Usage Guidelines
The
The no
The
Example
The following command prevents automatic disconnect:
TN3270 Server Commands 55