Cisco Systems 11.0 BT manual Show extended channel tn3270-server pu lu

Page 48

show extended channel tn3270-server pu lu

show extended channel tn3270-server pu lu

Use the show extended channel tn3270-server pu lu privileged EXEC command to display information about the TN3270 server LUs running on CIP interface in a Cisco 7000 series.

show extended channel slot/2 tn3270-server pu pu-namelu locaddr [history]

Syntax Description

 

slot/2

Specifies a particular CIP in the router where slot is the slot number.

 

The port value for a TN3270 server will always be 2.

pu-name

PU name that uniquely identifies this PU.

locaddr

LU LOCADDR that uniquely identifies the LU.

history

(Optional) Displays the LU trace history.

Command Mode

 

Privileged EXEC

 

Sample Displays

The following is sample output on the Cisco 7000 from the show extended channel tn3270-server pu lu command for a direct PU:

router# show extended channel 3/2 tn3270 pu ext2 lu 3

lu

 

name

client-ip:tcp

state

model

frames

in out

idle for

3

EXT2003

171.69.176.77:3829

ACTIVE

327902E

8

9

0:4:43

pu is

EXT2, lu is DYNAMIC type

0, negotiated TN3270

 

 

 

bytes

203 in,

2954 out; RuSize

0 in,

0 out; NegRsp

1 in, 0 out

 

pacing window

0 in, 1 out; credits 0

in, queue-size

0 in,

0 out

 

The following is sample output on the Cisco 7000 from the show extended channel tn3270-server pu lu command for a SNA session switch PU:

router# show extended channel 3/2 tn3270 pu int1 lu 1

lu

 

name

client-ip:tcp

state

model

frames

in out

idle for

1

GOAN1X01

171.69.176.77:3828

ACTIVE

 

4

4

0:4:51

pu is

INT1, lu is STATIC type 0, negotiated TN3270E

 

 

 

bytes

74 in,

1219 out; RuSize 0

in, 0 out;

NegRsp 0

in, 0

out

 

pacing window 0 in, 0 out; credits 0 in, queue-size

0 in,

0 out

 

The following is sample output on the Cisco 7000 from the show extended channel tn3270-server

pu lu history command:

router# show extended channel 3/2 tn3270 pu pus20 lu 1 history

lu

name

client-ip:tcp

state

model

frames in out

idle for

1

PUS20001

192.195.80.40:2480

ACT/SESS

327804

5

4

0:0:8

pu is PUS20, lu is DYNAMIC type 2, negotiated TN3270

bytes 155 in, 1752 out; RuSize 1024 in, 3840 out; NegRsp 0 in, 0 out>pacing window 0 in, 1 out; credits 0 in, queue-size 0 in, 0 out

traces:

48TN3270 Server Commands

Image 48
Contents January 15 Introduction Release NoteIntroduction Boot ROM Requirements CIP Boot Image RequirementsPlatform Support Cisco IOS PackagingUpdate to Configuration Guide Microcode Software New Software Features in 11.010BTConfiguring TN3270 Server on the Channel Interface Processor Configuring TN3270 on a Channel Interface Processor Configuring TN3270 on a Channel Interface ProcessorDynamic LU Allocation Formation of LU Model Type and NumberSpecific LU Allocation Examples of Model String MappingString from client Ascii Requested? String to Host Ebcdic SNA Session Switch-End Node Dlur Multiple Hosts SupportDirect PU Configuration in Router Adapte Comman Name IP-address Type NumberIDBLK=05D TN3270 Configuration Modes Task CommandTN3270 Configuration Modes TN3270 Server Configuration Mode Dlur Configuration ModeDlur SAP Configuration Mode PU Configuration ModeCommands Allowed in Multiple Modes TN3270 Configuration Task List TN3270 Configuration Task ListTask List for Multiple Appn Hosts Task List for Non-APPN HostsConfigure TN3270 Server Configure PU Parameters on the TN3270 ServerTN3270 Configuration Task List Command Configure DlurConfigure SAPs under Dlur Configure PUs under Dlur Monitor the TN3270 ServerPu pu-name idblk-idnum ip-address TN3270 Configuration Example Configuration dialog to configure the TN3270 function followsSYD.TN3020 SYD.VMG Update to Command Reference Update to Command ReferenceDlur DlurDlus-backup Dlus-backupGeneric-pool Generic-poolFollowing command permits generic LU pool use Idle-time Idle-timeKeepalive KeepaliveLink LinkLsap token-adapter Link Host rmac 4000.0000.0001 rsap Lsap LsapInternal adapter type on the CIP card, which corresponds to 4. It must be unique within the internal adapter in that noRelated Commands Maximum-lus Maximum-lusPreferred-nnserver Preferred-nnserverPu direct Pu directHosts are in which domains and does not enforce the unique PUs may use the same value on the internal adapter as longDefaults When a specific LU name request is needed. The format can34 TN3270 Server Commands Pu Dlur Pu DlurThis value must match the idblk-idnum value defined at Show extended channel tn3270-server Show extended channel tn3270-serverShow tn3270-server Field Descriptions LU numberFail number NumberDlur fq-cpname Dlus fq-dlusname38 TN3270 Server Commands Show extended channel tn3270-server client-ip-address Show extended channel tn3270-server client-ip-addressShow tn3270-server client-ip-address Field Descriptions LU locaddrLU lu-name Ip-addrtcpport State lu-stateNumber/number Show extended channel tn3270-server dlur Show extended channel tn3270-server dlurShow tn3270-server dlur Field Descriptions VRN fq-name Show extended channel tn3270-server dlurlink Show extended channel tn3270-server dlurlinkShow tn3270-server dlurlink Field Descriptions TGN tg-numberShow extended channel tn3270-server pu Show extended channel tn3270-server puShow tn3270-server pu Field Descriptions State pu-stateLU states and their meanings are Show extended channel tn3270-server pu lu Show extended channel tn3270-server pu luShow tn3270-server pu lu Field Descriptions 50 TN3270 Server Commands Shutdown ShutdownTcp-port Tcp-portTiming-mark Timing-markTn3270-server Tn3270-serverUnbind-action Unbind-actionVrn VrnCisco Connection Online Cisco Connection DocumentationCisco Connection Online Cisco Connection Documentation