PROGRAMMING THE BREWER (cont.)
UNITS (SETTING UNITS OF MEASURE)
This function allows the units of measure to be set in English or Metric readings for all screens. The program is defaulted to English.
WARNING: Changing the unit of measure will erase all coffee recipes stored in memory. All preinfu- sion, pulse times, etc will also be erased. If using this option after information has been stored, it is important to have this information stored elsewhere so that the machine can be reprogrammed.
Procedure for modifying units of measure:
1.Press and hold upper right hidden switch until the display reads UNITS. Release switch. Press and release METRIC or ENG to make a selection.
2.Press DONE to proceed. The display should now read CHANGING UNITS!! WILL ERASE!! ... ALL
PREVIOUSLY STORED RECIPES AND ALL SETUP INFO WILL BE LOST ... ARE YOU SURE?.
3.Press YES to begin the change. While the change is in process, the display will read RESTORING DEFAULTS and a count down will begin.
4.When the count down reaches 0 the display will read SET NEW RECIPE?. The units have been reset.
5.Press and release either of the ON/OFF switches located on the front switch panel to exit the UNITS function and return to the MAIN SCREEN.
UNITS
METRIC DONE ENG
SELECTS METRIC
AS THE
UNIT OF MEASURE
CHANGING UNITS
WILL!! ERASE!!
ALL PREVIOUSLY STORED RECIPES
AND ALL SETUP
INFO WIL BE LOST!
ARE YOU SURE?
YESNO
SELECTS ENGLISH
AS THE
UNIT OF MEASURE
REPLACEEXIT
P3260
Page 18 | 35879.1 071405 |
|