PROGRAMMING THE BREWER (cont.)
BREW OZ (SETTING OR ADJUSTING BREW VOL- UMES)
This function allows adjustment of the brew vol- umes for each batch. The indicator signifies volume in ounces per batch.
Procedure for modifying recipes - brew ounces: Range: 10.0 oz to 400 oz for all three batch sizes
1.Press and hold the upper right hidden switch until the display reads UNITS. Release the switch, then press and release switch again until the display reads REVIEW RECIPES.
2.Press YES to proceed. The display should now read NO NAME, along with MODIFY, SHOW and
NEXT.
3.Press and release NEXT to advance to the desired coffee name to be modified.
4.Press and release MODIFY. The display should read BREW OZ and a batch light will be blinking.
Press and release the batch size to be modified.
5.Using
6.When finished, press another batch size and repeat step 5 for that size for each batch size to be modi- fied. Continue setting all batch sizes.
7.When finished setting all batch sizes, press and release DONE. The display should read 3 BATCH
SIZES DONE?
8.If the three batch sizes are not correct, press and release NO to return to the BREW OUNCES setup screen and repeat steps 5, 6 and 7.
9.If the three batch sizes are correct, press YES. This will advance to the % BYPASS function. An- other alternative is to press the ON/OFF switch to exit the BREW OZ setup and return to the MAIN
SCREEN.
REVIEW RECIPES?
NOYES
EXIT TO
NEXT FUNCTION
SCREEN
MODIFYSHOWNEXT
BREW OZ. XX.X | ||
DONE | (+) | |
3 BATCHES DONE? | ||
NO |
| YES |
% BYPASS XX.X | ||
DONE | (+) | |
SEE MODIFYING
BYPASS PERCENTAGES
ON THE FOLLOWING PAGE
OR PRESS AND RELEASE
ON/OFF SWITCH TO EXIT THE
BREW OZ: SETUP AND RETURN
TO THE MAIN SCREEN
Page 24
ADVANCES TO ALL OTHER |
COFFEE NAMES PROGRAMMED |
IN THE BREWER'S MEMORY |
(COFFEE NAME) |
MODIFYSHOWNEXT |
WHEN THE LAST COFFEE NAME |
IN THE BREWER'S MEMORY IS |
DISPLAYED, PRESSING NEXT |
WILL EXIT AND THE DISPLAY |
WILL THEN READ: |
THAT WAS THE |
LAST RECIPE |
P2443 |
35879.1 071405