Installing CCA Server Components ■ Configuring CCA Resources
To add a resource in Network Manager
1Open View Hosts by clicking View by Host (Figure 2) to add shared resource.
Figure 2. Network Manager - Host view
To add dedicated resource, click View by Company.
2From Resources menu, choose Add Resource.
3In the Add New Server dialog box, complete the following fields:
■Host: Select the computer on which the resource is to be loaded.
■Resource ID: Numeric sequential identifier for the resource. This value is automatically assigned when the resource is created.
■Port: The IP port the resource uses for TCPIPBus messaging.
■Resource Type: The type of resource to configure.
■Dedicated: If this check box is checked, then the resource is assigned to a single company to use. If left unchecked, then the resource is available to all companies.
■Resource Mode: This can be set to Master or Backup.
■Company: Only used if Dedicated is checked.
■Trace Level: The level of detail written to the logs (where 1 is lowest and 5 is highest).
4Click Save to add another resource.
Configuring Resources Using Network Manager
Some resources require additional configuration after they are added. These resources are:
28