
Loading the Controller’s Drivers
Loading the Controller’s Drivers
In NetWare, you must install from
You must also copy your DOS version’s MSCDEX.EXE into a C:\DOS (for example) subdirectory.
Using an Adaptec Controller
If using an ADAPTEC controller, follow these steps:
1.Insert the Adaptec
Your MSCDEX file is located in the C:\DOS subdirectory. By default, your
This Adaptec
CONFIG.SYS file:
DEVICE=C:\SCSI\ASPI8DOS.SYS /D
DEVICE=C:\SCSI\ASPICD.SYS /D:ASPICD0
AUTOEXEC.BAT file:
C:\DOS\MSCDEX.EXE /D:ASPICD0 /M:12
2.You must also install the following lines in your CONFIG.SYS file as a prerequisite for DOS
files=12
buffers=15
3.Reboot to load the
4.Test the
Installing Netware |