NCR S16 manual Inserting the CD-ROM, Inserting the Supplement Volume Disk

Rebooting the Server and Installing the Operating System

4.For SCO Release 3, at the Hardware Setup screen, the Installation Media is SCSI CD-ROM. For SCO Open System software release 3.0, you must have the CD-ROM on host adapter 0 and SCSI ID 5.

5.At the Hardware Setup screen, select Hi-Resolution Keyboard Mouse. You must provide the correct information for your particular monitor in the Video selection. For most newer network adapters, you need to select the Deferred for the Network option.

6.At the Filesystem Setup screen, customize to your particular needs except for Swap Space. As a rule, swap space=2 X Total RAM

Inserting the CD-ROM

To insert the CD-ROM, follow these steps:

1.Insert the CD-ROM when promoted.

2.Normally select all addition service components.

3.For SCO Release 3, reinsert the BTLD disk and verify choice. CD-ROM file extraction begins -- (20 min. plus...).

4.Assign the root password and verify.

Inserting the Supplement Volume Disk

To insert the Supplement Volume Disk, follow these steps:

1.For SCO Release 3, insert the Supplement Volume disk. You are prompted for this disk twice.

2.For SCO Release 3, at the Packages? prompt, select “mdac” or “alad.”

Installation automatically generates subdirectories and files. After all copying/extraction is complete, a new kernel is built. Installation is now complete.

NCR S16 Minitower Server Installing Network Operating System 8-5