NCR S16 Rebooting the Server and Installing the Operating System, Default Installation Overview

Rebooting the Server and Installing the Operating System

Rebooting the Server and Installing the Operating System

When installing NCR UNIX SVR4 MP-RAS 3.01.01, you may perform a default or interactive installation, using either tape or CD-ROM installation media.

Using CD-ROM installation media is the preferred method. If you are installing MP-RAS 3.01.01 using tape media, refer to Installing NCR UNIX SVR4 MP-RAS, Release 3.0 guide.

Default Installation Overview

Default installation is the quickest and easiest way to install the software. The installation software uses default values to automatically partition, slice, and create file systems on your root disk, and then installs a standard set of packages. The slices are determined according to the amount of space needed to install the packages. Once the system is installed, you may add additional packages and configure other disks.

For default installations, follow these steps:

1.Boot from the installation media (Boot flex #1 and #2).

2.Select the type of installation (default or interactive).

3.Enter the system name.

4.Set the date and time.

5.Select the install media device.

6.Specify the secondary disks.

7.Install licenses (CD-ROM install only).

8.Reboot the system.

Additional administrative tasks may also be performed.

Note: On the drive being installed, a log (/var/spool /install/log.install) is kept of all events during the installation process. If the initial installation fails, you

11-4 Installing MP-RAS