NCR S16 manual Ecc

Confirming the CMOS	Settings
IDE Drive 3	(xxx MB)	None
On Board IDE		Disabled

6.Press Esc to return to the main menu in BIOS Setup.

7.Select Advanced System Configuration.

Page 1 - Verify that the parameters are set as follows:

E0000h - FFFFFh (System BIOS)	Enabled
C0000h - C7FFFh (Video BIOS)	Enabled
C8000h - CBFFFh	Disabled
CC000h - CFFFFh	Disabled
D0000h - D3FFFh	Disabled
D4000h - D7FFFh	Disabled
D8000h - DBFFFh	Disabled
DC000h - DFFFFh	Disabled
L1 and L2 Cache (CPU Cache)	Enabled
Cache Scheme	Write Back
ECC/Parity Mode Selection	ECC
Operation of ECC	Correction Enabled
Setting for SNA Cards	Disabled
Memory at 15 MB-16 MB Reserved for	System Use

8.Press Esc to return to the main menu in the BIOS Setup.

9.Select System Security. On Page 1, set the parameters as follows:

Disk Drive Control
Diskette Drive	Normal
Fixed Disk Drive	Normal
System Boot Drive	Drive A Then C

2-4 Confirming the CMOS Settings and Configuring PCI Adapters