NCR S16 manual Editing CONFIG.SYS and Rebooting

Rebooting the Server and Installing the Operating System

8.When the Advanced Options screen displays, select OK.

9.When the Complete screen displays, select OK.

Editing CONFIG.SYS and Rebooting

To edit CONFIG.SYS and reboot, follow these steps:

1.After completing the installation, you must edit the CONFIG.SYS file on your bootable fixed disk drive and again add the following line(s) (as appropriate) to the file:

BASEDEV=AIC7870.ADD

BASEDEV=DAC960.ADD

2. If using the Mylex controller you must remark out the following line:

BASEDEV=IBMINT13.I13

3.Verify that the install copied the files from your boot flex diskette to the fixed disk. If the file(s) were not copied, you must copy the files manually. Without the addition of the line(s), your CD-ROM will cease to function.

4.Reboot and watch the screen for any errors. If errors display, write them down if possible.

The installation of OS/2 is complete.

NCR S16 Minitower Server Installing Network Operating System 10-5