Pitney Bowes D1600, D1500 manual Top Scanner Position 10mm Bottom

Optical Mark Recognition (OMR) • 5

Once the Bottom Scanner is aligned, the Top Scanner (or paper guide if a corresponding Top Scanner is not fitted) must be positioned so that the sheet being scanned is kept at a controlled distance from the scanner.

This is achieved by adjusting the Top Scanner as described on page 5-19, but to a setting 10mm (3/8”) different to the Bottom Scanner setting. For example, if the Bottom Scanner is set to 70mm, set the Top Scanner to 80mm.

When setting the Top Scanner, use the appropriate adjustment scale depending on the location of the Bottom Scanner: The front scale for a Front Bottom Scanner and the rear scale for a Rear Bottom Scanner.

	Top Scanner					Top Scanner
						position
			60		70		80
		10mm
		(3/8”)
Bottom				Bottom
Scanner				Scanner
				position

SV40221 Rev. A 5-21