5 • Optical Mark Recognition (OMR)
OMR Mark Options
This section gives brief descriptions of the OMR Mark Options that can be allocated to relevant OMR marks. The previous section, OMR Marks Available on page
Present or Absent
When Present the machine will act upon scanning the relevant mark.
When Absent the machine will act upon NOT scanning the relevant mark.
Increment or Decrement
When choosing Increment the relevant code’s binary value will increase.
If you choose to use Decrement, the relevant code’s binary value will decrease.
Include Zero or Omit Zero (0) as a Value
If Include Zero is chosen, the relevant code’s binary value would allow zero, which is represented by no marks being printed within that section of the code.
When choosing to use Omit Zero the relevant code’s binary value will NOT include zero as a value. Therefore, a mark will ALWAYS be printed within that section of the code.
Continuous Sequence or Page 1 Reset
When using Continuous Sequence, the binary value within the relevant part of the code increments or decrements continuously on every sheet fed, irrespective of set boundaries.
If Page 1 Reset is used, the first page of each set has a binary value of 1, therefore the count always stays within the boundaries of the set.
SV40221 Rev. A |