Enlarging or reducing images
1Load paper.
2Load an original document faceup into the ADF or facedown on the scanner glass.
3From the printer control panel, press 
.
4Press the up or down arrow button to scroll to Resize.
5Press the left or right arrow button to select the setting that you want.
Notes:
•If you select Custom %, then press 
, and then press the left or right arrow button to select the desired custom percent value. Press 
to save the setting.
•If you select Borderless, then the printer will reduce or enlarge the document or photo as necessary to print a borderless copy on the paper size that you selected. For best results with this resize setting, use photo paper and set the paper type to Photo, or let the printer automatically detect the paper type.
•If you select a poster size, then the printer will print a single image across multiple printed pages.
6Press 
.
Note: After the copy job is finished, press 
to reset the settings to the default. The resize setting also switches to 100% after two minutes of printer inactivity.
Adjusting copy quality
1Load paper.
2Load an original document faceup into the ADF or facedown on the scanner glass.
3From the printer control panel, press 
.
4Press the up or down arrow button to scroll to Quality.
5Press the left or right arrow button to set the copy quality to Automatic, Draft, Normal, or Photo, and then press 
to save your setting.
6Press 
.
Making a copy lighter or darker
1Load paper.
2Load an original document faceup into the ADF or facedown on the scanner glass.
3From the printer control panel, press 
.
4Press the up or down arrow button to scroll to Lighter/Darker.
Copying
43