Dell P513w manual Make Sure Your Computer can Communicate with the Printer

Page 98

3Check to see whether the access point responds:

•If the access point responds, you will see several lines appear that start with “Reply from.”

It is possible that the printer did not connect to the wireless network. Turn off and then restart the printer to try to connect again.

•If the access point does not respond, it will take several seconds and then you will see “Request timed out.”

Try the following:

a Click , or click Start and then click Run.

b In the Start Search or Run box, type ncpa.cpl, and then press Enter. c Press Enter or click OK.

d Select the appropriate connection from the ones shown. e Right-click the connection, and then click Repair.

MAKE SURE YOUR COMPUTER CAN COMMUNICATE WITH THE PRINTER

1Obtain the printer IP address by printing a network setup page.

2Click , or click Start and then click Run.

3In the Start Search or Run box, type cmd.

4Press Enter, or click OK.

The Command Prompt window opens.

5Type ping followed by a space and the IP address of the printer. For example: ping 192.168.1.100

6Press Enter.

7If the printer responds, you will see several lines that display the number of bytes received from the printer. This ensures that your computer is communicating with your printer.

If the printer does not respond, then “Request timed out” displays.

•Your computer might not be connected to the network.

•You may need to change the settings of your printer. Run the Wireless Setup Utility again.

CONFIGURE THE PRINTER FOR WIRELESS ACCESS AGAIN

If your wireless settings have changed, you must run the printer wireless setup again. Some reasons your settings may have changed include your having manually changed your WEP or WPA keys, channel, or other network settings; or the access point having been reset to factory defaults.

Running the wireless setup again can also resolve issues due to misconfigurations that occurred when configuring the printer for wireless access.

Notes:

•If you change network settings, change them on all the network devices before changing them for the access point.

•If you have already changed the wireless network settings on your access point, then you must change the settings on all the other network devices before you can see them on the network.

Troubleshooting

98

Image 98

Contents

Dell P513w Users Guide MayContents Copying ScanningTroubleshooting 104Safety information Minimizing your printers environmental impact About your printerThank you for choosing this printer Conserving energyRecycling Finding information about the printerConserving ink Product Information Guide Understanding the parts of the printer UseAbout your printer Replacing ink cartridges Ordering and replacing suppliesOrdering ink cartridges Recycling Dell products Select Printer HomeUsing the printer control panel buttons and menus Using the printer control panelChanging the Power Saver timeout Sided/Eco-ModeChanging temporary settings into new default settings Saving paper and energy with Eco-ModeTo disable the settings timeout feature Resetting to factory settingsTo change the temporary settings into new default settings Using the printer control panel menusInitial Setup Complete appears on the display Software installed during printer installation Using the printer softwareUsing the Windows printer software Minimum system requirementsUsing the printer software Uninstalling the printer software Reinstalling the printer softwareChecking for software updates Installing the printer softwareLoading paper and original documents Loading paperSheets of heavyweight matte paper Saving paper default settings Loading original documents on the scanner glass Printing basic documents PrintingTips for printing Printing a documentPrinting pages in reverse order Printing multiple pages on one sheetPrinting envelopes If the printer is using a USB connectionPrinting specialty documents Tips on loading label sheets Printing labelsPrinting on custom-size paper Using a memory card or flash drive with the printer Working with photosPrinting photos using the printer control panel Supported memory cards and file typesEditing photos using the printer control panel You canPrinting photos from a PictBridge-enabled digital camera Printing photos from a memory device using the proof sheet Printing photos from a digital camera using Dpof Bluetooth Dongle Connected appears on the display Setting the Bluetooth security level Printing from a Bluetooth-enabled devicePrinting on both sides of the paper duplexing Printing on both sides of the paper duplexing automaticallyPrinting on both sides of the paper duplexing manually Pausing print jobs Setting your printer as the default printerChanging the printing mode Changing the printing mode for a single print jobCanceling print jobs Resuming print jobsMaking copies CopyingTips for copying Copying a two-sided document Copying photosCopying an ID card Making a copy lighter or darker Adjusting copy qualityEnlarging or reducing images Collating copies using the printer control panel Repeating an image on oneMaking a duplex copy automatically Copying multiple pages on one sheetMaking a duplex copy Making a duplex copy manuallyCanceling copy jobs Scanning to a local or network computer ScanningTips for scanning Scanning photos into an editing application Using the printer control panelScanning to a flash drive or memory card Using the printer software Scanning documents into an editing applicationHow can I improve the quality of a scan? Scanning directly to e-mail using the printer softwareScanning FAQ What is an application list, and how do I update it? Canceling scan jobsWhy am I being asked for a PIN? How do I scan in black and white?Networking Installing the printer on a wireless networkWireless network compatibility Supported network security optionsPrinting a network setup Interpreting the colors of the Wi-Fi indicator light Installing the printer on a wireless networkInstalling the printer on other computers Assigning a static IP address Special wireless installation instructionsAdding the printer to your wireless network Before you beginCreating an ad hoc wireless network Advanced wireless setupChanging wireless settings after installation Windows VistaWindows XP Adding a printer to an existing ad hoc wireless network WindowsUsing the printer locally USB Switching between USB and wireless connections Windows onlyUsing the printer wirelessly Sharing a printer in a Windows environment Prepare the computers to share the printerWhere do I find my WEP key or WPA passphrase? Networking FAQWhat is Wi-Fi Protected Setup? What is an SSID?Wireless network examples What is a network?How are home networks configured? Scenario 2 Wireless network with Internet access Why do I need an installation cable? How do I attach the installation cable?Characteristics How are infrastructure and ad hoc networks different?Remove Obstacles Between the Access Point and the Printer Finding the signal strengthHow can I improve wireless signal strength? Arrange the Network to Reduce Signal Absorption Remove Sources of InterferenceWhat is a MAC address? How do I find the MAC address?How to locate a printer IP address What is an IP address?What is TCP/IP? How do I locate IP addresses?What is a key index? How are IP addresses assigned?Checking ink levels Maintaining the printerMaintaining ink cartridges Aligning the printheadCleaning the exterior of the printer Cleaning the printhead nozzlesCleaning the scanner glass If Troubleshooting does not solve your problem TroubleshootingUsing the Service Center to solve printer problems Setup troubleshootingIncorrect language appears on the display Printhead errorsChange the Language Using the Printer Menus Remove and Reinsert the Printhead Software did not install Reconnect the Printer Power SupplyMake Sure the INK Cartridges are Inserted Correctly Remove and Reinstall the Printer SoftwarePrint job does not print or is missing pages Printer is busy or does not respond Make Sure the Printer is not in Power Saver ModePrinter is printing blank pages Cannot delete documents from the print queueCannot print through USB Jams and misfeeds troubleshootingMake Sure the USB Port is Enabled in Windows Paper jam in the printerPaper jam in the paper support Paper jam in the duplex unitCheck Paper Loading Paper or specialty media misfeedsCheck Paper Condition Streaks or lines on printed image Print troubleshootingPoor quality at the edges Print speed is slow Copy and scan troubleshootingComputer slows down when printing Maximize Computer Processing SpeedPoor copy or scanned image quality Copier or scanner does not respondScanner unit does not close Partial copies or scans of documents or photosScan was not successful Memory card troubleshootingMemory card troubleshooting checklist Scanning takes too long or freezes the computerReinsert the Memory Card Nothing happens when a memory card is insertedCannot print documents from a memory card or flash drive Check the Network ConnectionWireless troubleshooting Wireless troubleshooting checklistTurn the Wireless Access Point OFF and then Back on Resetting the wireless settings to factory defaultsCannot print over wireless network Disconnect from VPN SessionCheck the Wireless Signal Quality Make Sure Demo Mode is Turned OFFMove Your Access Point Away from Other Electronic Devices Check Your WEP KEY or WPA PassphraseCheck Your Advanced Security Settings Continue button is unavailable Cannot print and there is a firewall on the computer Wi-Fi indicator light is not litCheck Power Select the Wireless Printer Allow the Wireless Installation to CompleteEnable the Printer Select the Wireless Port Check Security Keys Wi-Fi indicator light is still orange Check Network Name Check MAC Address Make Sure the Access Point is onMove Your Access Point to Minimize Interference Ping the Access Point to Make Sure the Network is Working Configure the Printer for Wireless Access Again Make Sure Your Computer can Communicate with the PrinterWireless print server not installed How to locate a printer IP addressMake Sure the Wireless Port is Selected 100Resolving intermittent wireless communications issues 101102 Change the Channel the Wireless Router UsesConfigure the Wireless Router with a Unique Ssid Eliminate Sources of Interference103 Check for Known Issues with the Wireless RouterCheck for Wireless Adapter Updates Change ALL Network Devices to the Same TypeIndex 104105 106 Dpof107 Ssid108 VPN