6Press the arrow buttons to select the resolution quality and the original image size. Press each time you make a selection.
7Press to start scanning.
The scan is complete when the application you selected in step 5 opens on the destination computer, and the scan appears within the application as a new file.
Scanning to a flash drive or memory card
Before you begin, make sure your flash drive or memory card is not write protected.
1Load an original document faceup into the ADF or facedown on the scanner glass.
2From the printer control panel, press .
3Press the up or down arrow button to scroll to Memory Device.
4Insert the flash drive or memory card, and then press .
5Press the arrow buttons to select the resolution quality, the output file type you want to create, and the original image size. Press each time you make a selection.
Note: Select the PDF file type if you want to scan multiple pages and save them as one file.
6Press to start scanning.
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has been saved.
Scanning photos into an editing application
Using the printer control panel
1Load the photo or photos facedown on the scanner glass.
2From the printer control panel, press .
3Press the left or right arrow button to scroll to USB or the name of the network computer to receive the scan, and then press .
The local or network computer is the destination that will receive the scan.
Notes:
•You may be prompted to enter a PIN if the computer requires it. Enter the PIN using the keypad.
•To assign a computer name and a PIN to the computer, see the Help for the printer software associated with your operating system.
4Wait until the printer has finished downloading the list of scan applications available on the selected computer.
5Press the left or right arrow button to select a photo editing application, and then press .
6Press the arrow buttons to select the resolution quality, the type of output you want to create, and the original image size. Press each time you make a selection.
7Press to start scanning.
Scanning
48