Editing photos using the printer control panel
1Load photo paper.
2Insert a memory card or flash drive.
If document files and image files are stored on the memory device, then press to select Photos.
3From the printer control panel, press to select Select and Print.
4Press the left or right arrow button to select the layout of the photo you want to print, and then press .
5Press the left or right arrow button to select a photo for editing and printing.
6Press the up or down arrow button to scroll to , and then press .
From here
Brightness
Crop
Auto Enhance
Reduce Red Eye
Rotate
Colorized Effect
Frames
You can
Adjust the brightness of a photo.
Crop a photo.
Enhance a photo automatically.
Reduce the
Rotate a photo in
Select whether to print a photo in black and white, sepia, antique brown, or antique gray.
Select a frame for the photo.
7Press the arrow buttons to make your selections.
8Press the up or down arrow button to scroll to , and then press .
9Press the up or down arrow button to scroll to , and then press .
10If you want to adjust the print settings:
aPress again.
bPress the arrow buttons to make your selections.
cPress to save your selections.
dPress the up or down arrow button to scroll to Continue, and then press .
11Press the Color/Black button to set a color or
When you select color or
12Press .
Note: For best results, allow the prints to dry at least 24 hours before stacking, displaying, or storing.
Printing photos from a memory device using the printer software
1Load photo paper.
2From the printer control panel, press .
3Insert a memory card or flash drive.
4Transfer or print the photos:
Printing
31