Back to Contents Page
I/O Panel
Dell™ OptiPlex™ 320 User's Guide
Removing the I/O Panel
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
NOTE: Note the routing of all cables as you remove them so that you can
1. Follow the procedures in Before You Begin.
NOTICE: When sliding the I/O panel out of the computer, be extremely careful. Carelessness my result in damage to the cable connectors and the cable routing clips.
2.Remove the screw that secures the I/O panel.
3.Disconnect all of the cables from the I/O panel, and remove the panel from the computer.
1securing screw
2I/O panel
3I/O cable connector
Replacing the I/O Panel
1. To replace the I/O panel, follow the removal procedure in the reverse order.
NOTE: Use the guides on the I/O panel bracket to help position the I/O panel in place, and use the notch on the I/O panel bracket to help seat the panel.