Installing a Hard Drive
1. Check the documentation for the drive to verify that it is configured for your computer.
NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will sufficiently cushion it.
2.Unpack the replacement hard drive, and prepare it for installation.
3.If your replacement hard drive does not have the plastic
1hard drive
2release tabs (2)
3plastic
4.Attach the bracket to the new drive by snapping it onto the drive.
1 | securing tabs (2) | 3 | release tabs (2) |
|
|
|
|
2 | drive | 4 | plastic |
|
|
|
|
5.Connect the power and data cables to the drive.
6.Locate the correct slot for the drive, and slide the drive into the bay until it clicks into place.