Dell 3115CN Number of Redial, Int. of Redial, Ans Select, Auto Answer Fax, Auto Ans. TEL/FAX

Understanding Menus Page 38 of 61

To specify the interval time (3-255 seconds) of the resend attempts.

Number of Redial

Purpose:

To specify the number of redial attempts, 0-9. If you enter 0, the multifunction printer will not redial.

Int. of Redial

Purpose:

To automatically redial a remote fax machine if it was busy. Intervals from 1-15 minutes can be entered.

Ans Select

Purpose:

To select the default fax receiving mode.

Values:

TEL Mode	Automatic fax reception is turned off. You can receive a fax by picking up the handset of the
	external phone and then pressing the remote receive code, or by setting OnHook to On (you
	can hear voice or fax tones from the remote machine) and then pressing Start.
FAX	A fax is automatically received.
Mode*
TEL/FAX	When the multifunction printer receive an incoming a fax, the external telephone rings for the
Mode	time specified in Auto Ans. TEL/FAX, and then the multifunction printer automatically receive a
	fax. If incoming data is not a fax, the multifunction printer beeps from the internal speaker.
Ans/FAX	The multifunction printer can share one telephone line with an answering machine. In this
Mode	mode, the multifunction printer will monitor the fax signal and pick up the line if there are fax
	tones. If the phone communication in your country is serial, this mode is not available.
DRPD	Before using the Distinctive Ring Pattern Detection (DRPD) option, distinctive ring service must
Mode	be installed on your telephone line by the telephone company. After the telephone company
	has provided a separate number for faxing with a distinctive ring pattern, configure the fax
	setup to monitor for that specific ring pattern.

Auto Answer Fax

Purpose:

To answer an incoming call and automatically go into the receive mode. You can specify the time for incoming call of the external phone in 0-255 seconds.

Auto Ans. TEL/FAX

Purpose:

To share one telephone line with an external telephone. You can specify the time for incoming call of the external phone in 0-255 seconds.

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012