
Networking | Page 8 of 8 |
Restoring the Network Configuration
You can return the network configuration to its default settings.
1.Press
until >SETUP appears, and then press
.
2.Press
until >Admin Menu appears, and then press
.
3.Press
until >Wired Net or >Wireless Net appears, and then press ![]()
4.Press
until >Initialize NVM appears, and then press
.
5.Press
to select Yes, and then press
.
The network configuration is restored.
6. Power the multifunction printer off and back on or reset the network interface card.
Resetting the Network Interface Card
You can reset the network interface card when a network problems occurs.
1.Press
until >SETUP appears, and then press
.
2.Press
until >Admin Menu appears, and then press
.
3.Press
until >Wired Net appears, and then press
.
4.Press
until >Initialize NVM appears, and then press
.
5.Press
to select Yes, and then press ![]()
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012