Dell 3115CN manual TTN2

Dell Printer Configuration Web Tool Page 12 of 40

			Lighter2
			Lighter1
		Sharpness	Softer	Adjusts sharpness of color to make the copy softer than the original.
			Normal*	Does not adjust sharpness of color to make the copy sharper or softer than the original.
			Sharper	Adjusts sharpness of color to make the copy sharper than the original.
		Contrast	Normal*	Does not adjust the amount of color in a specified hue to make the copy sharper or softer than
				the original.
			Higher	Adjusts the amount of color in a specified hue to make the copy sharper than the original.
			Lower	Adjusts the amount of color in a specified hue to make the copy softer than the original.
		Auto Exposure	On	Adjusts the overall brightness to make the copy overexposed than the original.
		Auto Exposure Level	Normal*	Displays the level of the overall brightness in Normal.
			Higher(1)	Displays the level of the overall brightness in Higher(1).
			Higher(2)	Displays the level of the overall brightness in Higher(2).
		TIFF File Format	TIFF V6*	Sets the file in the TIFF V6 format.
			TTN2	Sets the file in the TTN2 format.
		Image Compression	Lower	Compresses an image in Lower.
			Normal*	Compresses an image in Normal.
			Higher	Compresses an image in Higher.
		Max E-Mail Size	50-16384	Sets a maximum volume of e-mail data. The default is 2048 bytes.
Fax Defaults*	3	Resolution	Standard*	For documents with normal sized characters.
			Fine	For documents containing small characters or thin lines or documents printed using a dot-matrix
				printer.
			SuperFine	For documents containing extremely fine detail. The super fine mode is enabled only if the
				remote printer also supports the Super Fine resolution.
		Original Type	Text&Photo	Uses for documents with both text and photo/gray tones.
			Photo	Uses for documents with photo or gray tones.
			Text*	Uses for documents with text.
		Lighter/Darker	Normal*	Works well with standard typed or printed documents.
			Darker1	Works well with light print or faint pencil markings.
			Darker2
			Darker3
			Lighter3	Works well with dark print.
			Lighter2
			Lighter1
		Delayed Start	Saves scanned documents for transmission at a specified time (0-23:59) in order to take advantage of lower long
			distance rates. The default is 21:00.
Fax Settings		Interval Timer	Specifies the interval time (3-255 minutes) of the resend attempts. The default is 8min.
		Number of Redial	Specifies the number of redial attempts, 0-9. If you enter 0, the multifunction printer will not redial. The default is 3.
		Interval of Redial	Automatically redials a remote fax machine if it was busy. Intervals from 1-15 minutes can be entered. The default is
			1min.
		Answer Select	Selects the default fax receiving mode.
			· TEL Mode
			· FAX Mode (automatic receive mode)
			· TEL/FAX Mode*
			· Ans/FAX Mode
			· DRPD (Distinctive Ring. Pattern Detection) Mode (DRPD is a service provided by some telephone companies.)
		Auto Answer Fax	Answers an incoming call and automatically goes into the receive mode in 0-255 seconds. The default is 1sec.
		Auto Answer	Shares one telephone line with an external telephone in 0-255 seconds. The default is 6sec.
		TEL/FAX
		Auto Answer	Shares one telephone line with an answering machine in 0-255 seconds. The default is 48sec.
		Ans/FAX
		Line Monitor	off	Turns off the volume for the line monitor.

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012