Installing Optional Modules | Page 12 of 48 |
NOTE: Ensure that the memory card is firmly fixed in the slot and cannot be moved easily.
6. Close the control board cover and turn the screw clockwise.
7.Turn on the multifunction printer.
8.Print a system settings page to verify that the additional print memory is installed correctly.
a.Press until >SETUP appears, and then press .
b.Press until >Reports appears, and then press .
c.System Settings is displayed. Press .
The system settings page is printed.
d.Verify the capacity of the installed memory listed in the system settings under General.
If the memory capacity has not increased, turn off the multifunction printer, unplug the power cable, and reinstall the memory card.
9.If you installed the additional print memory after installing the printer driver, update your driver by following the instructions for the operating system you are using. If the multifunction printer is on a network, update the driver for each client.
When Using PCL Driver
Microsoft® Windows Vista®
1.Click Start Control Panel Hardware and Sound Printers.
2.
3.Click the Options tab, and then select Get Information from Printer.
mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012