Dell 3115CN manual Print Server Settings

Dell Printer Configuration Web Tool Page 27 of 40

Purpose:

To verify the current settings of IPX/SPX (Internetwork Packet Exchange/Sequenced Packet Exchange) and Netware. In this page, you can only verify the settings of items. If you want to change the settings, go to the pages in the Print Server Settings tab.

Values:

IPX/SPX Settings	Frame Type	Displays the active frame type.
	Current Frame Type	Displays the current frame type.
	Network Address	Displays the IPX/SPX network address.
NetWare	Port Status	Displays the port status. When NetWare is implemented, the status of IPX/SPX and TCP/IP is also displayed.
	Device Name	Displays the printer name.
	Active Mode	Displays the current mode for Active Mode.
	Tree Name	Displays the tree name.
	Context Name	Displays the context name of the Print Server Object.
	File Server Name	Displays the file server name.
	Polling Interval	Displays the time interval.
	NCP Packet Burst	Displays the status, and whether to use NCP (NetWare Core Protocol) packet burst.
	Status Information	Displays messages according to the conditions of the multifunction printer.
SLP	Active Discovery	Displays whether active discovery is enabled.

NOTE: An optional multi-protocol card is required to display the NetWare Setup page.

E-Mail Alert Setup Page

Purpose:

To verify the current settings of SMTP/POP (Simple Mail Transfer Protocol/Post Office Protocol) used for the e-mail feature and E-Mail Alerts feature. In this page, you can only verify the settings of items. If you want to change the settings, go to the pages in the Print Server Settings tab.

Values:

E-Mail Server	Port Status		Displays the port status.
Settings
	Primary SMTP Gateway		Displays the primary SMTP (Simple Mail Transfer Protocol) gateway.
	SMTP Port Number		Displays the SMTP port number.
	E-Mail Send Authentication		Displays the authentication method for outgoing e-mail.
	POP3 Server Address		Displays the POP3 (Post Office Protocol 3) server address.
	POP3 Port Number		Displays the POP3 port number.
	Reply Address		Displays the IP address of servers connected with SMTP protocol when data is incoming.
	SMTP Server Connection		Displays the status of the SMTP server connection.
E-Mail Alert Settings	E-Mail List 1		Displays the acceptable e-mail addresses for the E-Mail Alert feature specified in E-mail List
			1.
	Select Alerts for List	Supplies Alerts	Displays the status, and whether to receive an E-Mail Alert for consumables.
	1
		Paper Handling	Displays the status, and whether to receive an E-Mail Alert for paper handling.
		Alerts
		Service Call	Displays the status, and whether to receive an E-Mail Alert for Service Calls.
	E-Mail List 2		Displays the acceptable e-mail addresses for the E-Mail Alert feature specified in E-mail List
			2.
	Select Alerts for List	Supplies Alerts	Displays the status, and whether to receive an E-Mail Alert for consumables.
	2
		Paper Handling	Displays the status, and whether to receive an E-Mail Alert for paper handling.
		Alerts
		Service Call	Displays the status, and whether to receive an E-Mail Alert for Service Calls.

Print Server Settings

The Print Server Settings tab includes Basic Information, Port Settings, Wireless LAN, TCP/IP, NetWare, SMB, AppleTalk, E-Mail Alert, Bonjour(mDNS), and SNMP pages.

Basic Information

mk:@MSITStore:C:\Users\14JMIS~1\AppData\Local\Temp\Rar$DIa0.409\UsersGuide.ch... 2/29/2012