Shell Object Commands
show verify
This command displays all verify schedules for the 9000 controllers in the system.
Example:
//localhost> show verify
Verify Schedule for Controller /c0
========================================================
Slot Day Hour Duration Status
1 | Sat | 11:00pm | 4 hr(s) | enabled |
2 | - | - |
| enabled |
3 | - | - |
| enabled |
4 | - | - |
| enabled |
5 | - | - |
| enabled |
6 | - | - |
| enabled |
7 | - | - |
| enabled |
For additional information about verify schedules, see “/cx add verify=ddd:hh:duration” on page 46, and see the discussion of background tasks and schedules in 3ware Serial ATA RAID Controller User Guide.
show selftest
This command displays all selftest schedules for the 9000 controllers in the system.
Example:
//localhost> show selftest
Selftest Schedule for Controller /c0
========================================================
Slot Day Hour UDMA SMART
1 | Sun | 12:00am | enabled | enabled |
2 | Mon | 12:00am | enabled | enabled |
3 | Tue | 12:00am | enabled | enabled |
4 | Wed | 12:00am | enabled | enabled |
5 | Thu | 12:00am | enabled | enabled |
6 | Fri | 12:00am | enabled | enabled |
7 | Sat | 12:00am | enabled | enabled |
For additional information about selftest schedules, see “/cx add selftest=ddd:hh” on page 47, and see the discussion of background tasks and schedules in 3ware Serial ATA RAID Controller User Guide.
www.3ware.com | 23 |