AMCC 9590SE-4ME manual Ex show fans, Ex show temp, Ex show all, Ex/slotx show

Enclosure Object Commands

/ex show fans

This command lists the fans in enclosure /ex and shows their status. Possible statuses are OK and Unknown.

Example:

//localhost> /e0 show fans

Fan Status

----------------------

fan0 OK

/ex show temp

This command lists the temperature sensors in enclosure /ex and the current temperature.

The maximum temperature for successful use of a drive should be noted in the documentation for the drive.

Example:

//localhost> /e0 show temp

TempSensor Temperature

-------------------------------

temp024~C(75~F)

/ex show all

This command shows the current settings of all attributes for enclosure /ex.

/ex/slotx show

This command shows information about the specified /slotx on the specified enclosure /ex. The slot name is followed by its status. If a slot has been inserted with a drive and no fault has been detected, the status is OK. If the slot is empty the status would indicate NO-DEVICE. The port that is correlated to the slot is indicated in the next column. If no device is found in the slot, that is indicated with a dash (-) in the Port column. The final column shows whether “identify” is currently set for the specified slot.

Example:

//localhost> /e0/slot1 show			Identify
Slot	Status	Port

----------------------------------------------------

slot1 OK /c0/p1 Yes

www.3ware.com 81