Trango Broadband M900S Power Specifications, Mechanical and Environmental Specifications General

Auto-Negotiation:	Fully supports IEEE802.3-2002 Sect. 2 Clause 28
Bridging Frame Size:	60 to 1600 bytes
Mngmt Frames:	60 to 1472 bytes (includes PING, TELNET, TFTP, HTTP)
Protection:	Bi-directional transient voltage protection diodes on all data lines
	compliance with:
	IEC61000-4-2	(ESD)
	IEC61000-4-4	(EFT)
	IEC61000-4-5	(Lightning)
Power Specifications
Input Voltage:	Input voltage range at unit is 10.5 VDC to 24 VDC max

Power is supplied via the unused pins of the RJ-45 Jack. Power is injected into the Ethernet cable using a junction box (provided).

Current Cons.:	400 mA in transmit and receive modes at max power using 24 V
	standard adapter (8 W) and 10 ft cable from J-BOX to unit
Protection:	28 volt Transient Voltage Suppression (TVS) on power input
	Note: Voltages above 28 volts will cause damage to unit.
Mechanical and Environmental Specifications
General
Material:	High Temp Polycarbonate radome and diecast metal enclosure
Size:	12.5” x 8” x 2.75” including mounting studs
Weight:	4 lb
Mounting:	2 U-Brackets, all-thread rod, nuts and washers
Connectors/Indicators
RF Output:	Integral internal patch antenna per Part 15C, 15.203
	External RP-SMA-f connector for external antenna
FCC Compliance:	The transceiver shall comply with the following:
	FCC Part 15.407
	FCC Part 15.207(a)
Operating Temp:	-40º to 60º C
Storage:	-40º to 85º C
Humidity:	100 % (When sealed properly.)
NEMA Rating:	NEMA 4
Shock:	Sustain 3 axis drop from 5 feet
Standard External Power Supply
24 Volt DC Power adapter and J-Box supplied with product.
Type:	Linear wallmount transformer
Input:	120 VAC
Output:	24 VDC +/- 1 V
Max current:	1000 mA
Connector:	5mm DC Barrel-type Plug
Standard External Power-over-Ethernet Junction Box
Type:	In-line female-to-female RJ-45 adapter for CAT-5 Ethernet cable
Connectors:
Eth. In:	Shielded RJ-45 Jack
DC Input:	5mm DC Barrel-type Jack
Trango Broadband Wireless — User Manual M900S Rev. C		Page 48