Trane CH530, CCUN 205-211 manual General information, Foreword, Safety recommendations, Reception

Page 2

General information

Foreword

These instructions are given as a guide to good practice in the installation, start-up, operation, and maintenance by the user, of Trane CH530 chiller control system on CGWN/CCUN and CGAN 209-214 chillers. They do not contain full service procedures necessary for the continued successful operation of this equipment. The services of a qualified technician should be employed through the medium of a maintenance contract with a reputable service company. Read this manual thoroughly before unit start-up.

Warnings and cautions

Warnings and Cautions appear at appropriate sections throughout this manual. Your personal safety and the proper operation of this machine require that you follow them carefully. The constructor assumes no liability for installations or servicing performed by unqualified personnel.

WARNING! : Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION! : Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices or for equipment or property-damage-only accidents.

Safety recommendations

To avoid death, injury, equipment or property damage, the following recommendations should be observed during maintenance and service visits:

1.Disconnect the main power supply before any servicing on the unit.

2.Service work should be carried out only by qualified and experienced personnel.

Reception

On arrival, inspect the unit before signing the delivery note.

Reception in France only:

In case of visible damage: The consignee (or the site representative) must specify any damage on the delivery note, legibly sign and date the delivery note, and the truck driver must countersign it. The consignee (or the site representative) must notify Trane Epinal Operations - Claims team and send a copy of the delivery note. The customer (or the site representative) should send a registered letter to the last carrier within 3 days of delivery.

Reception in all countries except France:

In case of concealed damage: The consignee (or the site representative) must send a registered letter to the last carrier within 7 days of delivery, claiming for the described damage. A copy of this letter must be sent to Trane Epinal Operations - Claims team.

Note: for deliveries in France, even concealed damage must be looked for at delivery and immediately treated as visible damage.

2

CG-SVU02B-E4

Image 2
Contents User Guide Foreword Safety recommendationsGeneral information ReceptionTraining WarrantyMaintenance contract Contents Overview Controls InterfaceDynaView Interface Display ScreensKeypad/Display Lockout Feature KeypadMain Reports Settings Main ScreensAuto Stop Chiller Level Mode Top Level Mode Description Stopped Chiller Level Mode Top Level Mode Description MP ResettingMP Resetting Sub Modes Description Stopped Sub Modes DescriptionRun Inhibit Sub Modes Description Chiller Level Mode Top Level Mode Description Run InhibitChiller Level Mode Top Level Mode Description Auto Auto Sub Modes DescriptionWaiting to Start Sub Modes Description Chiller Level Mode Top Level Mode Description RunningChiller Level Mode Top Level Mode Description Running Limit Running Sub Modes DescriptionShutting Down Sub Modes Description Chiller Level Mode Top Level Mode Description Shutting DownChiller Level Mode Top Level Mode Description Misc Misc. Sub Modes DescriptionCircuit Level Operating Modes Circuit Level Mode Top Level Mode Description Misc Circuit Level Mode Top Level Mode Description Running LimitCircuit Level Mode Top Level Mode Description Shutting Down Preparing Shutdown Sub Modes DescriptionReports Screen Circuit Ashrae Log Historic DiagnosticsAshrae Chiller Log Settings Screen Description Units Resolution, Default ChillerCircuit Manual Control Settings Feature SettingsSystem Manual Control Settings Display SettingsDiagnostics Screen Chiller Mode StoppedTechView Interface CD-ROMSoftware Download TechView Interface Diagnostics Compressor Fault Active Diagnostic Name Effects SeverityModes Criteria Reset Inactive Level MP Reset Has Occurred Low Pressure CutoutEvaporator Entering Water Suction Temperature SensorTemperature Temp Sensor Evaporator Leaving WaterHigh Pressure Cutout ErrorHigh Evaporator Water Emergency StopPump 1 or Fan Fault Fault DetectedPump Fault Detected Evaporator WaterDiagnostic Name Effects Severity Active Criteria Reset Modes Level InactiveDiagnostics Special Main Processor Boot Messages and Diagnostics DynaView Display Message Description TroubleshootingDiagnostics Event/state Description Programmable Relays Alarms and StatusDefault setting Event/Status CG-SVU02B-E4 CG-SVU02B-E4