Panasonic WJ-GXE500E manual Transmit images onto an FTP server

Page 15

Transmit images onto an FTP server

Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured at an alarm occurrence or captured at a designated interval to an FTP server will become available.

Important:

•When using this function, set the user name and the password to access the FTP server to restrict users who can log into the FTP server.

•To transmit images to the FTP server, select "Not use" for "SD memory card", or select "FTP error" for "Save trigger" on the [SD memory card] tab of the "Basic" page. (☞ Page 31)

Transmit an alarm image at an alarm occurrence (Alarm image transmission)

An alarm image can be transmitted at an alarm occurrence to the FTP server. To transmit alarm images to an FTP server, it is necessary to configure the settings in advance.

The settings for the FTP server can be configured on the [FTP] tab of the "Server" page. (☞ Page 52)

The alarm image transmission function can be turned on/off on the [Alarm] tab of the "Alarm" page. (☞ Page 45)

Note:

•Depending on the network traffic, the number of the transmitted images may not reach the set number of images to be transmitted.

•Alarm images failed to be transmitted to the FTP server at an alarm occurrence will not be saved on the SD memory card.

Transmit images at a designated interval or period (FTP periodic image trans- mission)

Images can be transmitted at a designated interval or period. To transmit images at a designated interval or period, it is necessary to configure the settings in advance.

The settings for the FTP server can be configured on the [FTP] tab of the "Server" page. (☞ Page 52)

It is possible to determine whether or not to use the FTP periodic image transmission function and to configure the settings relating to alarm images and the schedule on the [FTP img. trans.] tab of the "Network" page. (☞ Page 56)

Note:

•Depending on the line speed or the traffic, images may not be transmitted at the designated interval.

•When "On" is selected for both the alarm image transmission function and the FTP periodic image transmission function, the alarm image transmission function will be given priority over the FTP periodic image transmission function. Therefore, images may not be transmitted at the interval designated on the "FTP periodic image trans- mission" setting.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Network Video Encoder Operating InstructionsContents Preface Trademarks and registered trademarksAbbreviations About the network security Viewer softwareStep Example of IPv6 accessMonitor images on a PC Monitor images from a single cameraWhen Ch1-2 is selected for Ch selection When Ch1-3 is selected for Ch selectionWhen Ch1-4 is selected for Ch selection About the Live Log button *1 2Auto mode *2AUX buttons *2 Rec. on SD button *27Camera title 5Preset *24Brightness buttons *2 6Unit title@4Main area @3SD recording status indicatorMonitor images from multiple cameras Record images on the SD memory card manually Action at an alarm occurrence Save images on the SD memory cardTransmit an image onto a server automatically Notify of alarm occurrences by e-mail Transmit images onto an FTP server Page Prev. page button Display the log listNumber of the listed logs Top buttonEvent Next page buttonLast button Time & dateREV Play button Number of imagesCh No REW buttonStop button FF buttonPREV. Image button Pause buttonNext Maintenance of the unit MaintenanceError description Check the system log System logUpgrade the firmware Upgrade Camera restart Reset the settings/Reboot the unit Default resetLoad the default Html files setup menu Reset to the default and load the default Html filesDisplaying the Help screen Viewing HelpHow to display the setup menu Display the setup menu from a PCHow to operate the setup menu 4Status display area About the setup menu windowSetup button 5SetupMenu Tab Outline Reference Setup menu and its itemsFTP Setup items Setting values Underlined default BasicBasic tab QVGA/VGA SD memory card tabPage Log tab JPEG/H.264 tab Image/AudioSetup items Setting values Underlined default Setup items Setting values Underlined default MPEG-4 JPEG/MPEG-4 tabSetup items Setting values Underlined default Setup items Setting values Underlined default Image/Position tab Setup itemsAbout the operation panel Audio tabCoaxial/RS-485 tab Page Multi-screen Multi-screen setup tabAlarm tab AlarmVMD area tab Click the Set button → The edited settings will be applied Notification tab Advanced func. XML notification tabFace detection tab User mng. User auth. tabHost auth. tab System tab Server Mail tabFTP tab NTP tab Network tab NetworkWAN Ddns tabFTP img. trans. tab Snmp tabSchedule tab ScheduleCategory Indication Description About the displayed system logError indications relating to Ddns Symptom Cause/solution TroubleshootingSymptom Symptom Installation Guide Symptom Cause/solution Reference Pages Information Bar Cause/solution Appendix Image capture size VGAImage capture size Qvga SD memory card is enough, the older images will be SD memory Save trigger Overwrite Save logs Card Log tab SD memory card tab Logs and associated imagesFTP error Images FTP Directory structure of drive BPanasonic Canada Inc
Top Page Image Contents