Panasonic WJ-GXE500E manual Basic tab, Setup items Setting values Underlined default

[Basic] page

[Basic] tab

Refer to page 28 for general information about this tab.

Setup items		Setting values (Underlined: default)
Unit title		(Default: WJ-GXE500)
Camera title	Ch1	(Default: WJ-GXE500 Ch1)
	Ch2	(Default: WJ-GXE500 Ch2)
	Ch3	(Default: WJ-GXE500 Ch3)
	Ch4	(Default: WJ-GXE500 Ch4)
Time & date	Date/time *1	2010/01/01 00:00:00 - 2035/12/31 23:59:59
	Time display format	24 h/12 h/Off
	Date/time display format *2	DD/MM/YYYY (Default for the PAL model)
		MM/DD/YYYY
		DD/Mmm/YYYY
		YYYY/MM/DD
		Mmm/DD/YYYY (Default for the NTSC model)
	Summer time (daylight saving)	In/Out
Camera title on screen		On/Off
Camera title on	Ch1 - Ch4	(Default: None (blank))
screen (0-9, A-Z)
OSD position	OSD Position	Upper left/Lower left/Upper right/Lower right
	Display style	Opaque/Transparent
SD memory card error LED *3		On/Off
Alarm status update mode *4 *5		Polling(30sec)/Real time
Alarm status reception port *6		1 - 65 535 (Default: 31 004)
Automatic installation of viewer software *7 *8		On/Off

Important:

*7 • It is impossible to display images and to receive/transmit audio between the unit and the PC when the viewer software "Network Camera View 4" is not installed on the PC.

*8 • The number of the viewer software installations can be checked on the [Upgrade] tab of the "Maintenance" page.

*1	• The default time & date is calculated based on the manufacture date & time.
*2	• When "10.04.01 13:10:00" is set for "Date/time" after selecting "24h" for "Date/time display format", time
	& date will be respectively displayed as follows.
	DD/MM/YYYY:	01/04/2010 13:10:00
	MM/DD/YYYY:	04/01/2010 13:10:00
	DD/Mmm/YYYY:	01/Apr/2010 13:10:00
	YYYY/MM/DD:	2010/04/01 13:10:00
	Mmm/DD/YYYY:	Apr/01/2010 13:10:00

30