Panasonic WJ-GXE500E manual Advanced func, XML notification tab, Face detection tab

[Advanced func.] page

[XML notification] tab

Refer to page 28 for general information about this tab.

Setup items			Setting values
			(Underlined: default)
XML notification *1	XML notification *2		On/Off
	Notification interval		1s/2s
Destination setting for	Destination1 - 2	Destination address	(Default: None (blank))
XML notification
		Destination port number *3	1 - 65535
			(Default: None (blank))
		Destination path name	(Default: None (blank))
		User name	(Default: None (blank))
		Password	(Default: None (blank))

*1 • When "D1" is selected for "Image capture mode", it is impossible to activate the XML notification function. *2 • When "On" is selected, face detection information is notified to the designated destination server in the

XML format.

*3 • The following port numbers are unavailable since they are already in use. 20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 995, 10 669, 10 670

[Face detection] tab

Refer to page 28 for general information about this tab.

Setup items		Setting values (Underlined: default)
Face detection	Face detection *1 *2 *3 *4	On/Off
	XML notification

Important:

•When "Multicast" is selected for "Transmission type" on the [JPEG/H.264] (or [JPEG/MPEG-4]) tab and "On" is selected for "Priority stream" on the [System] tab, it may sometimes be impossible to display the face detection setup window.

*1 • The face detection function shall not guarantee the detection of faces in an image. The face detection accuracy varies with imaging conditions.

*2 • When "Mosaic" is selected for "Display type" of "Privacy zone", the face detection function may some- times be triggered (the face detection frame will be displayed).

*3 • When "D1" is selected for "Image capture mode", it is impossible to activate the face detection function. *4 • Face detection is available on Ch1 only.

49