Panasonic WJ-GXE500E manual Ddns tab, Wan

Page 55

*12 • When "Bandwidth control(bit rate)" on the [Network] tab of the "Network" page is set low, taking a picture using the one shot button may not function depending on the use environment. In this case, select "QVGA" for "Image capture size" of "JPEG" on the [JPEG/H.264] (page 34) (or [JPEG/MPEG-4]

(page 37)) tab or set "Image quality" of "JPEG" lower.

Note:

Refer to the network administrator for the addresses of each server.

The port forwarding function changes a global IP address to a private IP address, and "Static IP masquerade" and "Network Address Translation (NAT)" have this function.This function is to be set in a router.

To access this unit via the Internet by connecting the unit to a router, it is necessary to assign a respective HTTP port number for each device and address translation by using the port forwarding function of the router. Refer to the operating instructions of the decoder for further information.

Enter [Global IP address + : (colon) + port number] in the "Address" box of the browser via the Internet. vvv.xxx.yyy.zzz:82 vvv.xxx.yyy.zzz:81

WAN

Router

LAN

Global address

 

Private address

vvv.xxx.yyy.zzz

 

192.168.0.254

Internet

(WAN)

Cable modem xDSL modem

Address translation using the port forwarding function vvv.xxx.yyy.zzz:82 192.168.0.2:82

Private address 192.168.0.2 Port number: 82

Address translation using the port forwarding function vvv.xxx.yyy.zzz:81 192.168.0.1:81

Private address 192.168.0.1 Port number: 81

OPERATE

 

 

SD CARD

ACT

 

ERROR

 

LINK

Network Video

 

 

 

 

Encoder

 

 

WJ-GXE500

OPERATE

 

 

SD CARD

ACT

 

ERROR

 

LINK

Network Video

 

 

 

 

Encoder

 

 

WJ-GXE500

[DDNS] tab

Refer to page 29 for general information about this tab.

Setup items

DDNS

Host name

User name

Password

Access interval

Setting values (Underlined: default)

On/Off

(Default: None (blank))

(Default: None (blank))

(Default: None (blank))

1min/10min/30min/1h/6h/24h

When communicating using IPv4, obtain a global IP address from the DHCP server. To access this unit via the

Internet, it is necessary to configure the settings for the DDNS function. When using the DDNS function, it is possible to access with "Host name registered in the DDNS server.nmdns.net". To use the DDNS function, it is necessary to connect to the dedicated DDNS server. Refer to the web site for further information about the DDNS. Refer to the readme file on the provided CD-ROM for the web site.

55

Image 55
Contents Network Video Encoder Operating InstructionsContents Trademarks and registered trademarks PrefaceAbbreviations About the network security Viewer softwareStep Example of IPv6 accessMonitor images on a PC Monitor images from a single cameraWhen Ch1-3 is selected for Ch selection When Ch1-2 is selected for Ch selectionWhen Ch1-4 is selected for Ch selection About the Live Log button *1 2Auto mode *2AUX buttons *2 Rec. on SD button *27Camera title 5Preset *24Brightness buttons *2 6Unit title@4Main area @3SD recording status indicatorMonitor images from multiple cameras Record images on the SD memory card manually Save images on the SD memory card Action at an alarm occurrenceTransmit an image onto a server automatically Notify of alarm occurrences by e-mail Transmit images onto an FTP server Page Prev. page button Display the log listNumber of the listed logs Top buttonEvent Next page buttonLast button Time & dateREV Play button Number of imagesCh No REW buttonStop button FF buttonPREV. Image button Pause buttonNext Maintenance of the unit MaintenanceError description Check the system log System logUpgrade the firmware Upgrade Camera restart Reset the settings/Reboot the unit Default resetLoad the default Html files setup menu Reset to the default and load the default Html filesDisplaying the Help screen Viewing HelpHow to display the setup menu Display the setup menu from a PCHow to operate the setup menu 4Status display area About the setup menu windowSetup button 5SetupMenu Tab Outline Reference Setup menu and its itemsFTP Basic Setup items Setting values Underlined defaultBasic tab QVGA/VGA SD memory card tabPage Log tab JPEG/H.264 tab Image/AudioSetup items Setting values Underlined default Setup items Setting values Underlined default MPEG-4 JPEG/MPEG-4 tabSetup items Setting values Underlined default Setup items Setting values Underlined default Image/Position tab Setup itemsAbout the operation panel Audio tabCoaxial/RS-485 tab Page Multi-screen Multi-screen setup tabAlarm tab AlarmVMD area tab Click the Set button → The edited settings will be applied Notification tab XML notification tab Advanced func.Face detection tab User auth. tab User mng.Host auth. tab System tab Mail tab ServerFTP tab NTP tab Network tab NetworkWAN Ddns tabFTP img. trans. tab Snmp tabSchedule tab ScheduleCategory Indication Description About the displayed system logError indications relating to Ddns Symptom Cause/solution TroubleshootingSymptom Symptom Installation Guide Symptom Cause/solution Reference Pages Information Bar Cause/solution Image capture size VGA AppendixImage capture size Qvga SD memory card is enough, the older images will be SD memory Save trigger Overwrite Save logs Card Log tab SD memory card tab Logs and associated imagesFTP error Images FTP Directory structure of drive BPanasonic Canada Inc