Symptom
Cannot access from the web browser.
Cannot obtain images on the SD memory card.
No image is displayed.
Cause/solution | Reference | |
pages | ||
| ||
|
|
•Is the same IP address provided to other devices?
Are there contradictions between the address and the network subnet to be accessed?
<When the unit and the PC are connected in the same subnet>
Are the IP addresses of the unit and the PC set in a common subnet? Or is "Use Proxy Server" for the set-
tings of the web browser checked? |
| – |
When accessing the unit in the same subnet, it is rec- |
|
|
ommended to enter the address of the unit in the |
|
|
"Don’t Use Proxy For These Addresses" box. |
|
|
<When the unit and the PC are connected in the dif- |
|
|
ferent subnet> |
|
|
Is the IP address of the default gateway set for the unit |
|
|
correct? |
|
|
• Is "Allow" selected for "FTP access to unit" on the |
|
|
|
| |
[Network] tab of "Network" page? |
|
|
It is necessary in advance to select "Allow" for "FTP |
| 54 |
access to unit" on the [Network] tab of the "Network" |
|
|
page. |
|
|
• Is the entered password correct? |
|
|
|
| |
|
| |
Restart the web browser and enter the password |
| 50 |
again. |
|
|
|
|
|
|
|
|
• Access to the SD memory card may be failed. Restart |
| – |
the browser and retry to obtain images. |
| |
|
| |
|
|
|
• Is the viewer software installed on the PC? |
| 4 |
| ||
Install the viewer software on a PC. |
| |
|
| |
|
|
|
•Is the version of DirectX 9.0c or later?
Check the version of DirectX as follows.
(1) | Select "Run…" from the start menu of Windows. | – | |
(2) | Enter "dxdiag" in the displayed dialog box and | ||
| |||
| click the [OK] button. |
|
If the version of DirectX is older than 9.0c, upgrade it.
61