Panasonic WJ-GXE500E manual When Ch1-2 is selected for Ch selection

Page 6

Important:

To enhance the security, change the password for the user "admin". It is recommended to change this pass- word periodically.

When displaying multiple H.264 (or MPEG-4) images on a PC, images may not be displayed depending on the performance of the PC.

Note:

When "H.264" is selected for "Video encoding format", H.264 video will be displayed. When "MPEG-4" is selected, MPEG-4 images will be displayed.

When multiple users are receiving audio, the frame rate of H.264 (or MPEG-4) images or the refresh interval of

JPEG images may be lower than the specified value.

The maximum number of concurrent access user is 14 including users who are receiving H.264 (or MPEG-4) images and users who is receiving JPEG images. Depending on the set values for "Bandwidth control (bit rate)" and "Max bit rate (per client) *", the maximum concurrent access number may be less than 14 users. When 14 users are concurrently accessing, the access limit message will be displayed for users who subsequently attempt to access. When "Multicast" is selected for "Transmission type" of "H.264" (or "MPEG-4"), only the first user who accessed to monitor H.264 (or MPEG-4) images will be included in the maximum number. The second and subsequent users who are monitoring H.264 (or MPEG-4) images will not be included in the maximum num- ber.

When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission") (pages 34 to 40), H.264 (or MPEG-4) images will be displayed. When "Off" is selected, a JPEG image will be displayed. It is possible to dis- play a JPEG image even when "On" is selected for "H.264" (or "MPEG-4 transmission").

The refresh interval may become longer depending on a network environment, PC performance, photographic subject, access traffic, etc.

<Refresh interval of JPEG images>

When "Ch1 only" is selected for "Ch selection"

When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA, D1): 15 fps (NTSC model), 12.5 fps (PAL model)

When "Off" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA, D1): 30 fps (NTSC model), 25 fps (PAL model)

When "Ch1-2" is selected for "Ch selection"

When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA, D1): 15 fps (NTSC model), 12.5 fps (PAL model)

When "Off" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA, D1): 15 fps (NTSC model), 12.5 fps (PAL model)

When "Ch1-3" is selected for "Ch selection"

When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA, D1): 10 fps (NTSC model), 8.3 fps (PAL model)

When "Off" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA, D1): 15 fps (NTSC model), 12.5 fps (PAL model)

When "Ch1-4" is selected for "Ch selection"

When "On" is selected for "H.264 transmission" (or "MPEG-4 transmission")

JPEG (VGA, QVGA): 3 fps (NTSC model), 3.1 fps (PAL model)

JPEG (D1): 2 fps (NTSC model), 2.1 fps (PAL model)

When "Off" is selected for "H.264 transmission" (or "MPEG-4 transmission")

• JPEG (VGA, QVGA, D1): 15 fps (NTSC model), 12.5 fps (PAL model)

6

Image 6
Contents Operating Instructions Network Video EncoderContents Preface Trademarks and registered trademarksAbbreviations Viewer software About the network securityMonitor images from a single camera Example of IPv6 accessMonitor images on a PC StepWhen Ch1-2 is selected for Ch selection When Ch1-3 is selected for Ch selectionWhen Ch1-4 is selected for Ch selection About the Live Rec. on SD button *2 2Auto mode *2AUX buttons *2 Log button *16Unit title 5Preset *24Brightness buttons *2 7Camera title@3SD recording status indicator @4Main areaMonitor images from multiple cameras Record images on the SD memory card manually Action at an alarm occurrence Save images on the SD memory cardTransmit an image onto a server automatically Notify of alarm occurrences by e-mail Transmit images onto an FTP server Page Top button Display the log listNumber of the listed logs Prev. page buttonTime & date Next page buttonLast button EventREW button Number of imagesCh No REV Play buttonPause button FF buttonPREV. Image button Stop buttonCheck the system log System log Maintenance of the unit MaintenanceError description NextUpgrade the firmware Upgrade Reset to the default and load the default Html files Reset the settings/Reboot the unit Default resetLoad the default Html files setup menu Camera restartViewing Help Displaying the Help screenDisplay the setup menu from a PC How to display the setup menuHow to operate the setup menu 5Setup About the setup menu windowSetup button 4Status display areaSetup menu and its items Menu Tab Outline ReferenceFTP Setup items Setting values Underlined default BasicBasic tab SD memory card tab QVGA/VGAPage Log tab Image/Audio JPEG/H.264 tabSetup items Setting values Underlined default Setup items Setting values Underlined default JPEG/MPEG-4 tab MPEG-4Setup items Setting values Underlined default Setup items Setting values Underlined default Setup items Image/Position tabAudio tab About the operation panelCoaxial/RS-485 tab Page Multi-screen setup tab Multi-screenAlarm Alarm tabVMD area tab Click the Set button → The edited settings will be applied Notification tab Advanced func. XML notification tabFace detection tab User mng. User auth. tabHost auth. tab System tab Server Mail tabFTP tab NTP tab Network Network tabDdns tab WANSnmp tab FTP img. trans. tabSchedule Schedule tabAbout the displayed system log Category Indication DescriptionError indications relating to Ddns Troubleshooting Symptom Cause/solutionSymptom Symptom Installation Guide Symptom Cause/solution Reference Pages Information Bar Cause/solution Appendix Image capture size VGAImage capture size Qvga SD memory card is enough, the older images will be Log tab SD memory card tab Logs and associated images SD memory Save trigger Overwrite Save logs CardFTP error Images Directory structure of drive B FTPPanasonic Canada Inc