Panasonic WJ-GXE500E manual Multi-screen setup tab

[Multi-screen] page

[Multi-screen setup] tab

Refer to page 28 for general information about this tab. Refer to page 12 for how to operate.

Setup items				Setting values (Underlined: default)
Group A	Cam. 1	- Cam. 4	IP address *1 *2	(Default: None (blank))
			Ch No. *3	−/Ch1/Ch2/Ch3/Ch4
			Camera title *4	(Default: None (blank))
Group B	Cam. 5	- Cam. 8	IP address *1 *2	(Default: None (blank))
			Ch No. *3	−/Ch1/Ch2/Ch3/Ch4
			Camera title *4	(Default: None (blank))
Group C	Cam. 9	- Cam. 12	IP address *1 *2	(Default: None (blank))
			Ch No. *3	−/Ch1/Ch2/Ch3/Ch4
			Camera title *4	(Default: None (blank))
Group D	Cam. 13 - Cam. 16		IP address *1 *2	(Default: None (blank))
			Ch No. *3	−/Ch1/Ch2/Ch3/Ch4
			Camera title *4	(Default: None (blank))

*1 • When using the host name, it is necessary to configure the DNS settings of the PC to be used for the multi-screen display. (☞ Page 54)

*2 • Regardless of the settings of the registered device, the images will be displayed altered to the aspect ratio of 4:3 on a multi-screen.

*3 • Select "–" when displaying images on a multi-screen using a device without channel information.

*4 • When selecting a 16 split-screen, some characters of the camera title to be displayed may not be dis- played.

44