Panasonic WJ-GXE500E manual Information Bar

Page 66

Depending on the OS installed on the PC, the following may occur.

Follow the instructions below when the following has occurred. By performing the following solutions, other appli- cations and the security level may not be affected.

The "Information Bar" expressed in the following symptom and solutions will be displayed just below the address bar only when there is information to communicate.

Symptom

The following message is dis- played on the information bar. "Pop-up blocked. To see this pop-up or additional options, click here…"

The following message is dis- played on the information bar. "This site might require the following ActiveX control 'nwcv4setup.exe' from 'Panasonic System Networks Co., Ltd.'. Click here to install..."

"Pop-up blocked. To see this pop-up or additional options, click here…"

An unnecessary status bar or scroll bar is displayed on the pop-up window.

Information Bar

Cause/solution

Reference

pages

 

 

 

Click the information bar and select "Always Allow

Pop-ups from This Site…". The dialog window say-

ing "Allow pop-ups from this site?" will be dis-

played.

 

Click the [Yes] button.

 

• Click the information bar and select "Install ActiveX

 

 

Control".

 

The "Security Warning" window will be displayed.

 

Click the "Install" button on the displayed "Security

 

Warning" window.

 

 

 

 

Click "Internet Options…" under "Tools" of the menu bar of Internet Explorer, and then click the [Security] tab. Click "Internet" in the "Select a Web content zone to specify its security settings:" section. Then, click the [Custom Level…] button to open the

"Security Setting" window. Under "Miscellaneous",

select "Enable" for "Allow script-initiated windows

 

without size or position constraints". Click the [OK]

 

button.

 

When the warning window is displayed, click the

 

[Yes] button.

 

66

Image 66
Contents Operating Instructions Network Video EncoderContents Preface Trademarks and registered trademarksAbbreviations Viewer software About the network securityMonitor images from a single camera Example of IPv6 accessMonitor images on a PC StepWhen Ch1-2 is selected for Ch selection When Ch1-3 is selected for Ch selectionWhen Ch1-4 is selected for Ch selection About the Live Rec. on SD button *2 2Auto mode *2AUX buttons *2 Log button *16Unit title 5Preset *24Brightness buttons *2 7Camera title@3SD recording status indicator @4Main areaMonitor images from multiple cameras Record images on the SD memory card manually Action at an alarm occurrence Save images on the SD memory cardTransmit an image onto a server automatically Notify of alarm occurrences by e-mail Transmit images onto an FTP server Page Top button Display the log listNumber of the listed logs Prev. page buttonTime & date Next page buttonLast button EventREW button Number of imagesCh No REV Play buttonPause button FF buttonPREV. Image button Stop buttonCheck the system log System log Maintenance of the unit MaintenanceError description NextUpgrade the firmware Upgrade Reset to the default and load the default Html files Reset the settings/Reboot the unit Default resetLoad the default Html files setup menu Camera restartViewing Help Displaying the Help screenDisplay the setup menu from a PC How to display the setup menuHow to operate the setup menu 5Setup About the setup menu windowSetup button 4Status display areaSetup menu and its items Menu Tab Outline ReferenceFTP Setup items Setting values Underlined default BasicBasic tab SD memory card tab QVGA/VGAPage Log tab Image/Audio JPEG/H.264 tabSetup items Setting values Underlined default Setup items Setting values Underlined default JPEG/MPEG-4 tab MPEG-4Setup items Setting values Underlined default Setup items Setting values Underlined default Setup items Image/Position tabAudio tab About the operation panelCoaxial/RS-485 tab Page Multi-screen setup tab Multi-screenAlarm Alarm tabVMD area tab Click the Set button → The edited settings will be applied Notification tab Advanced func. XML notification tabFace detection tab User mng. User auth. tabHost auth. tab System tab Server Mail tabFTP tab NTP tab Network Network tabDdns tab WANSnmp tab FTP img. trans. tabSchedule Schedule tabAbout the displayed system log Category Indication DescriptionError indications relating to Ddns Troubleshooting Symptom Cause/solutionSymptom Symptom Installation Guide Symptom Cause/solution Reference Pages Information Bar Cause/solution Appendix Image capture size VGAImage capture size Qvga SD memory card is enough, the older images will be Log tab SD memory card tab Logs and associated images SD memory Save trigger Overwrite Save logs CardFTP error Images Directory structure of drive B FTPPanasonic Canada Inc