Panasonic WJ-GXE500E manual NTP tab

Page 53

[NTP] tab

Refer to page 29 for general information about this tab.

Setup items

Setting values (Underlined: default)

 

 

Time adjustment *1

Manual/Synchronization with NTP server

 

 

NTP server address *2

(Default: None (blank))

 

 

NTP port *3

1 - 65535 (Default: 123)

 

 

Time adjustment interval

1h - 24h

 

 

Time zone

(Default: (GMT) Greenwich Mean Time : Dublin,

 

Edinburgh, Lisbon, London)

 

 

Important:

*2 • Use an NTP server when the more accurate time & date setting is required for the system operation.

When entering the host name for "NTP server address", it is necessary to configure the DNS settings on the [Network] tab of the "Network" page. (Page 54)

*1 • When "Manual" is selected, the time set on the [Basic] tab on the "Basic" page will be used as the stan- dard time of the unit. (Page 30)

*3 • The following port numbers are unavailable since they are already in use. 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 161, 162, 995, 10 669, 10 670

53

Image 53
Contents Network Video Encoder Operating InstructionsContents Abbreviations PrefaceTrademarks and registered trademarks About the network security Viewer softwareMonitor images on a PC Example of IPv6 accessMonitor images from a single camera StepWhen Ch1-4 is selected for Ch selection When Ch1-2 is selected for Ch selectionWhen Ch1-3 is selected for Ch selection About the Live AUX buttons *2 2Auto mode *2Rec. on SD button *2 Log button *14Brightness buttons *2 5Preset *26Unit title 7Camera title@4Main area @3SD recording status indicatorMonitor images from multiple cameras Record images on the SD memory card manually Transmit an image onto a server automatically Action at an alarm occurrenceSave images on the SD memory card Notify of alarm occurrences by e-mail Transmit images onto an FTP server Page Number of the listed logs Display the log listTop button Prev. page buttonLast button Next page buttonTime & date EventCh No Number of imagesREW button REV Play buttonPREV. Image button FF buttonPause button Stop buttonError description Maintenance of the unit MaintenanceCheck the system log System log NextUpgrade the firmware Upgrade Load the default Html files setup menu Reset the settings/Reboot the unit Default resetReset to the default and load the default Html files Camera restartDisplaying the Help screen Viewing HelpHow to display the setup menu Display the setup menu from a PCHow to operate the setup menu Setup button About the setup menu window5Setup 4Status display areaMenu Tab Outline Reference Setup menu and its itemsFTP Basic tab Setup items Setting values Underlined defaultBasic QVGA/VGA SD memory card tabPage Log tab JPEG/H.264 tab Image/AudioSetup items Setting values Underlined default Setup items Setting values Underlined default MPEG-4 JPEG/MPEG-4 tabSetup items Setting values Underlined default Setup items Setting values Underlined default Image/Position tab Setup itemsAbout the operation panel Audio tabCoaxial/RS-485 tab Page Multi-screen Multi-screen setup tabAlarm tab AlarmVMD area tab Click the Set button → The edited settings will be applied Notification tab Face detection tab Advanced func.XML notification tab Host auth. tab User mng.User auth. tab System tab FTP tab ServerMail tab NTP tab Network tab NetworkWAN Ddns tabFTP img. trans. tab Snmp tabSchedule tab ScheduleCategory Indication Description About the displayed system logError indications relating to Ddns Symptom Cause/solution TroubleshootingSymptom Symptom Installation Guide Symptom Cause/solution Reference Pages Information Bar Cause/solution Image capture size Qvga AppendixImage capture size VGA SD memory card is enough, the older images will be SD memory Save trigger Overwrite Save logs Card Log tab SD memory card tab Logs and associated imagesFTP error Images FTP Directory structure of drive BPanasonic Canada Inc